Sintered Carbide Plates
Wear resistance Impact resistance Long lifetime
1. Mainly used for precision punching and high speed punching, such as inserting plugs,Ei silicon steel slices,etc.
2.The characters of cemented carbide plate products are very stable. The quality is also very good.
3.We have all of the cemented carbide plates, experienced producing technology and advanced facilities.
Sintered Carbide Plates in different specifications according to clients' specific requirements. The surface condition are divided as sintered blank and grinding, which meet different products applications. Following is a drawing showing the tungsten carbide plate we supplied.
Properties and applications of carbide for Plates | ||||||
Grade | Density | T.R.S | Hardness | Performance & application recommended | ||
g/cm³ | MPa | HRA | ||||
YG4A | 14.9 | 1850 | 92 | Fine grade alloy, with good wear resistance, used for processing blades,wear resistance parts etc. | ||
YG8 | 14.7 | 2400 | 89.5 | High bending strength, wear resistance lower than MK6A, used for processing blades,wear resistance parts etc. | ||
YG15 | 14.5 | 2500 | 87.5 | Used for punch dies,stamping dies and wear resistance parts. | ||
YG20 | 13.5 | 2800 | 85.5 | High bending strength,used for step dies and other stampings dies. | ||
Type | unit:mm | |||||
L | W |
| ||||
200 | 200 | 10-45 | ||||
150 | 150 |
| ||||
150 | 130 | 10-45 | ||||
150 | 100 | 10-45 | ||||
150 | 80 | 10-45 | ||||
120 | 120 | 10-45 | ||||
100 | 100 | 10-50 | ||||
100 | 50 | 10-50 | ||||
100 | 45 | 10-50 | ||||
80 | 55 | 10-50 | ||||
80 | 40 | 10-40 | ||||
70 | 35 | 5-40 | ||||
45 | 25 | 5-20 | ||||
35 | 19 | 5-20 | ||||
20 | 20 | 5-20 | ||||
18 | 13 | 5-20 | ||||
··· | ··· | ··· | ||||
Other types of plates may be offered according to customers' requirement |
Sintered Carbide Plates