Introduction:

Made up of RED, GREEN and BLUE high power LED, the inground lights can realize more than 16,770,000 kinds of color output, and with great effect and colorful features. It adopts wires with 4pin connectors, and work with 4-wire and 3-loop controller,which can achieve Gradual Change, jumping and many good light effect.

Application:

With IP67 rank and-20°C~45°C working temperature,the inground lights can adapt to a variety of indoor and outdoor temperature, humidity difference. They can be widely used in decoration of the buildings, stage, ancient buildings, shopping malls, hotel, cultural place and so on.

Technical parameters:     

Attention:

1.Please  follow the "use environment" requirements;

2.The inground lights work with 4-wire and 3-loop controller or Simple DMX controller, could not work without RGB controller;

3.Please choose the Adequate power supply according to the total power if the lights;

4.Three addresses for each RGB controller, the first simple DMX controller or 4-wire and 3-loop controller added by three is the address of next simple DMX controller or 4-wire and 3-loop controller;

5.The inground lights series connected with the same 4-wire and 3-loop controller or Simple DMX controller are with the same change effect;

6.The Maximum address of the 4-wire and 3-loop controller or Simple DMX controller is 510;

7.Please follow the illustration of conection when connect many lights;

8.To ensure the good control, please add amplifiers when the distance is more than 100meters.

RGB Inground Light