Welcome to ECVERY
Inform DSPMP 1105 On line UPS
Inform DSPMP 1105 On line UPS
Supplier Info
[China Supplier]
Contact Person : Ms. Li Lisa
Tel : 86-755-86372529
Fax : 86-755-86652135
Product Detail
1. Authorized Distributor in CHINA 2. Input Power Factor Correction PFC 3. Cold Start Function 4. Real DSP controller

DSP MULTIPOWER SERIESUninterruptible Power SystemsOn-Line “ Double Conversion” Technology1Phase in / 1Phase out - from 5kVA to 10kVA3Phase in / 1Phase out - 10kVA On-Line Double Conversion Technology Real Digital Signal Processor ( DSP ) Controller Parallel redundant operation up to 4 units Input Power Factor Correction PFC ( 0,99 ) Low Total Harmonic Distortion (THD) Level Convertible display helps to use both for tower and rack applications Transformerless Design High Performance with the PWM Sinewave Topology Cold Start Function Intelligent Battery Management System extends the life time of batteries Overload, Overheat & Short Circuit Protections User Friendly Multi-Functional LED/LCD Display Panel Energy Saving Mode ( ECOMODE ) Smart Fan Speed Regulation with temperature controlled RS232 Communication Port & Management Software Internal SNMP, Dry Contact, RS485 Card options

TYPEDSPMP 1105DSPMP 1106DSPMP 1110DSPMP 3110
Power(kVA)561010
INPUT 
Phase Configuration1Ph+N+PE3Ph+N+PE
Nominal Voltage220V/230V380V/400V
Minumum Voltage160V277V
Maximum Voltage280V485V
Frequency45-65 Hz
Power Factor0,99
OUTPUT 
Power Factor0.8
Phase Configuration1Ph+N+PE
Nominal Voltage220V / 230V (adjustable)
Nominal Current at 220V23A27A45,5A
Wave FormPure Sine Wave
Total Harmonic Distortion at 100% linear load<3%
At 100% Non-Linear Load<5%
Frequency50Hz or 60Hz (adjustable)
Frequency Tolerance (free running)±0,2%
Frequency Regulation±1Hz; ±3Hz
Statik Voltage Regulation (0%-100% load)<1%
Crest Factor3:1
Transfer Time0sec
Overload (on mains at 110% load)2 min
Overload (on mains at 125% load)1 min
Overload (on mains at 150% load)30 sec
Total Efficiency≥ 92%
Greenmode Efficiency≥ 97%
Output ConnectionTerminals
Outlets (Optional)External Socket Box (2pcs SCHUKO, 4pcs IEC Outlets)
BATTERY 
TypeMaintenance-Free lead acid batteries
Recharge Time4-6h up to 90%
Voltage240VDC
Quantity per string20pcs
Cold startPresent

PHYSICAL SPECIFICATIONS (Tower Position) 
Net Weight (power module)25kg26kg28kg
Net Weight (with internal batteries)55kg 
Dimensions (mm) (HxWxD)-power module440x88x680440x132x680
Dimensions (mm) (HxWxD)-w/battery vers440x176x680 
STANDARDS 
StandardsEN62040-1-1 (safety); EN62040-2 (EMC); EN62040-3 (performance); EN60950-1

Inform DSPMP 1105 On line UPS

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.