1.three phase ups
2.wide input voltage range
3.1 year warranty
4.central control panel
three phase ups 10kva 15kva 20kva
Model | 10KS | 15KS | 20KS |
Rated Power | VA/W | 10kVA/8kW | 15kVA/12kW | 20kVA/16kW |
Input | Nominal Voltage | 380VAC |
Voltage Range | 304 ~ 478VAC |
Phase | 3 phase (4 wires plus ground) |
Frequency Range | 46 ~ 54Hz |
Power Factor | 0.95 |
Connection | Ha rdwired |
Output | Voltage | 220VAC ±1%, Single phase |
Frequency | 50Hz ±0.1% ( Battery mode) |
Waveform | Sine Wave |
Power factor | 0.8 |
Voltage Distortion | £ 2% under linear load |
Overload Capability | 105% ~ 130% for 10 min., ³130% for 1 min. |
Current Crest Ratio | 3:1 max. |
Battery | Type | Sealed, Maintenance free, Lead-Acid |
Nominal DC Voltage | 192VDC |
Back-up time (full load) | Depends on the capacity of the external battery capacity |
Connection | External Battery Socket | Hardwired |
Transfer time | 0 ms |
Maintenance Bypass Switch | Yes |
LED indicators | Status | Load level/Battery level, Battery , Utility power, Inverter, Bypass, Overload, Fault |
Audible alarm | Bypass | Alarm beeps every two minutes |
Battery discharge | Alarm beeps every four seconds, every second if battery low |
Overload | Alarm beeps two for every second |
Fault | Alarm beeps continuously |
Acoustic noise | At 1 meter distance | £ 55 dBA | £ 60 dBA |
Communications | DB-9 Port | RS232 serial interface |
Intelligent Slot | Options: WebPower, As400 or WinPower CMC |
Parallel Port | up to three units in parallel for power redundancy and load sharing |
Environmental | Operating temperature | 0 ~ 40°C |
Operating humidity | 20% ~ 90% non-condensing |
Weight | Net (kg) | 38.5 | 55 |
Dimensions | W x D x H (mm) | 260 x 570 x 717 |
three phase ups 10kva 15kva 20kva