Installation
The thermostatic mixing valve C1301 is installed on domestic sanitary or floor heating installations.
It can be mounted on the pipes attached to the boiler or hot water storage device or, alternatively, it may be positioned in the manifold cabinet for sanitary installations using flexible pipes in ducting.
Adjustment
The thermostatic mixing valve C1301 can be adjusted to provide mixing temperatures as indicated in the table.
The adjustment of the mixer is effected by lifting the hand wheel against the return spring followed by rotation until the desired position is reached. When the hand wheel is released the spring returns it into contact with the valve body. The hand wheel engages in the splines provided on the valve body, which prevent accidental movement.
Technical Data:
Max. working pressure 1.6 Mpa (16 bar)
Max. working temperature 85°C
Adjustment precision ± 1 °C
Thermostatic wax sensor
Handle with position locking device
Body in pressed brass
Stainless steel internal springs
Ethylene- Propylene O-Rings
Hand wheel made of highly resistant plastic material
stoping valve 3 way electric valce solar