Solenoid valves for medical analysers, biotechnology and chemical industry;
Ideal solenoid valves to control corrosive fluid
FEATURES• Solenoid valves for medical analysers, biotechnology and chemical industry• Ideal solenoid valves to control corrosive fluids• The solenoid valves satisfy all relevant EC directives GENERALDifferential pressure See «SPECIFICATIONS» [1 bar =100 kPa]Maximum viscosity 37 cSt (mm2/s)Response time 25 ms
fluids (*) | temperature range (TS) | seal materials (*) |
air, inert gases, filtered,water, oil and liquid fluids | -10°C to + 100°C | VMQ |
FPM |
SBR |
MATERIALS IN CONTACT WITH FLUID(*) Ensure that the compatibility of the fluids in contact with the materials is verifiedBody PEI (polyetherimide)Poppet seal VMQ, SBR or FPM ELECTRICAL CHARACTERISTICSCoil insulation class FConnector Spade plug (cable Ø 6-8 mm or Ø 6-10 mm)Connector specifi cationwith coil 6W/6W (BMX) DIN 43650, 11 mm, industry standard Bwith coil 8W/9W (AMX) ISO 4400 / EN 175301-803, form AElectrical safety IEC 335Electrical enclosure protection Moulded IP65 (EN 60529)Standard voltages DC (=) : 12V - 24V(Other voltages and 60 Hz on request) AC (~) : 24V - 115V - 230V / 50 Hz (BMX = 50-60 Hz) SPECIFICATIONS
spigotO.D. | spigotI.D. | flowcoefficientKv | operating pressuredifferential (bar) | power coil(W) | cataloguenumber | options |
(mm) | (m3/h) | (l/min) | min. | max. (PS) | FPM | EPDM |
air, inert gases, liquids (*) |
~ | = | ~ | = | ~/= |
NC - Normally closed, VMQ seals |
8 | 2.7 | 0.23 | 3.83 | 0 | 5(10) | 5 | 6 | 6 | DF283A003 | V | E |
8 | 3.4 | 0.30 | 5.00 | 0 | 3(6) | 3 | 6 | 6 | DF283A004 | V | E |
11 | 5.5 | 0.55 | 9.16 | 0 | 1.5 | 1 | 8 | 9 | DF283A010 | - | - |
NC - Normally closed, SBR seals |
11 | 5.5 | 0.55 | 9.16 | 0 | 4.5 | 1 | 8 | 9 | DF283A008 | V | E |
NO - Normally open, VMQ seals |
8 | 3.4 | 0.30 | 5.00 | 0 | 3 | 2.5 | 6 | 6 | DF283A016 | V | E |
NO - Normally open, FPM seals |
11 | 5.5 | 0.55 | 9.16 | 0 | 1.5 | 1 | 8 | 9 | DF283A018V | - | - |
DF283 Series Solenoid Valve