Heater tap 1.Application:YUTONG, IVECO 2.Connector: customization 3.Dimensions:112*57*72(mm)

The newbase heater tap used to Control and adjust the water flow in A/C system , so as to control the heating system in vehicle.

Continuous adjust the water flow through swithing the polarity of actuator, at the same time,the actuator would send back the ventilation position signal to the system.

The technical information:

  

Technical data
Power supply	12/24/48 VDC
Power consumption	3W
Current	BELOW 100mA
Electrical cable	Max.1m X 0.5mm²
Direction of rotation	ON/OFF
Angle of rotation	89°+2°
Torque	6kgf.cm
Running time	3.5+0.5rpm
Locked torque	12kgf.cm
Locked current	Max.250mA
Noise level	Max.43dB(A)
Ambient temperature	-3080
Storage temperature	-4085
Life	Max.500,000 cycle
Dimensions	112X57X72(mm)
Weight	205 g
Quality certifications	TS16949/ISO9001

Application case:  YUTONG BUS, IVECO

Quality & Standard:

 ISO9001,TS16949 Quality Assurance,SQ/DENSOTwo-year unconditional warranty from installation date.

Our Principle:

 Professional - Focus  - Attention

 Our Cooperation Partners:

YUTONG Bus Heater tap