1, Long life cycle angle seat valve 2, Quality Ensure,100% Tested 3, Good after-sell service 4, MOQ 10pcs 5, CE, ISO9001

COMPANY:

KLQD Produce: Air source treatment, air unit, solenoid valve, pressure reducing valve, hand valve, high pressure valve, cylinder and pneumatic fitting, festo type, smc type, airtac type, shako types..., these are widely used in metallurgy, shipbuilding, light industrial machinery, food packing industry.

CONTACT: Ms Luna    MOBILE: 0086-137 7794 4409  

 

2/2-WAY PISTON-OPERATED seat valves FOR NEUTRAL AND AGGRESSIVE LIQUIDS AND GASES

1. Clean the pipes carefully from any residue, dribble or welding residue, to

avoid any damage to the seal.

2. To be installed as required, preferably with actuator in upright position

3. Connect the pipes according to the reference points (flow direction)

found on the valve body.Only disassemble the actuator if required by customer.

4. Before taking the valve apart, depressurize the media supply and pilot air

supply piping system.

Flow direction below the seat (direction A)

1,Valves with flow direction below the seat (direction A) ensure long service life.

2,Valves used for liquid media are waterhammer-free.

3,Valves with orifice DN15/DN20/DN25 are ideal for the operating pressure of 0.3Mpa.

Vavles with orifice DN32/DN40 are operated with double-acting actuators DN100.

Valves with orifice DN50 are operated with double-acting actuators DN125.

Flow direction above the seat (direction B)

Valves with dirction B provide high sealing integrity, used for steam and gases media.

There is a danger of waterhammer ,when the valves used for liquid media.

ORDERING CODE:

DESCRIPTION:

SIZE:

 

 

Stainless steel angle seat valve