Ads by Google
Materials:1)Body: Brass
2)Spring: steel EN 10270-1 SH3)Control knob: PA6GFPerformance:1)Nominal pressure: PN 102)Discharge rating: - 1/2” Ø 15; 10 kW- 3/4” Ø 22; 25 kW3)Medium: water4)PED category: IV5)Settings: - temperature: 90,99- pressure: 5-6 - 7 - 10 bar
Function:The TP relief valve controls and limits the temperature and pressure of the hot water contained in a solar domestic water storage heater and prevents it from being able to reach temperatures of over 100°C, with the formation of steam.On reaching the settings, the valve discharges a sufficient amount of water into the atmosphere so that the temperature and pressurereturn within the system’s operating limits.
Operating principleThe valve opens the outlet on reaching the settings for:- temperature: the thermostat compound inside the temperature sensor
1), submerged in the hot water storage heater, expands as the temperature increases. This expansion causes a thrustpin to move and act on the obturator
2) opening the valve. The valve is set to open at temperatures of over 99°C.- pressure: the obturator, opposed by a set spring, raises on reaching the pressure setting and opens the outlet completely. The pressure setting is chosen according to the maximum permissible pressure in the system.As the temperature and pressure decrease, the opposite action occurs with the valve subsequentlyreclosing within the set tolerances.
Installation:Before installing a TP relief valve it is necessary for the sizing to be performed correctly by specialized technical personnel in accordance withthe current regulations for the specific applications. Any use other than the intended use is prohibited.The TP relief valves must be installed by qualified technical personnel in accordance with current regulations.The TP relief valves must be installed observing the direction of flow indicated by the arrow on the valve body.
Temperature and Pressure Valve temperature valve pressure