Dual flow solenoid valve for fuel dispenser for diesel and fuel dispenser in service station Good quality and price Offer OEM Dual flow solenoid valve for fuel dispenser

is used for the fuel dispenser to control speedily and efficiently the high/low oil flow

Medium: fuel oils, gas,water and etc

Overshoot ( closing time): set lead 0.5Lpressure when nozzle open:0.115MPa<0.3L

Leakage: 0

Flow rate: >42L/min( high flow rate)

Power supply: 220VAC  50Hz   12VDC  50Hz  24VDC  50Hz

( Perssure when nozzle close 0.175Mpa)

( Pressure when nozzle open): 3.5-4L/min( small flow rate )

Voltage deviation: ±30%   Coils grade: H   Insulation strength 20MΩ

Working form 100% lead length: 1.5m (standard)   Explosion-proof mark:Power: 2×5W

Pressure range: 0.35MPa (Max) 0.035Mpa(Min)

Ambient temperature: -40  ~55    Relative humidity:  95%(+25  )

Medium temperature: -40  ~50     Working air pressure:  86~106Kpa

  Workplace: Applies to Zone 1, Zone 2 including type IIÿgroup T1~T3 explosion gas mixture

Inlet port	Flange connect pitch-row70
	Mounting hole  φ9 or M8
Outlet port	Flange connect pitch-row 70
	Mounting hole  φ9 or M8

Dual flow solenoid valve for fuel dispenser in service station