brass forging compressure pipe fitting 1. Material: brass (Cu57+) 2. Heat resistng fiber gasket 3. Certification: ISO9001, CE

Feature:

Brass body, O-ring, rubber sealing. 

Surface: nickel plated.

Technical instruction:

1. Before assembling, all parts must be clean, without oil or grease. All burrs and sharp edges must be removed.

2. Before conneting, body cap male thread must be coated with sealing glue. 

3. Handle turns on and off freely. 

4 After assembling tested by water at a pressure no less than 0.6Mpa, no leakage.

brass forging compressure pipe fitting