Ads by Google
industry portable blower fan
Cell: + 86 1879 0673 640 skype: recycling000
1. Applications
This type of fans are generally used for the air conveying and draughting of different types of biomass boilers.
2. Structure
Main parts:Case,Impeller,Motor, protective screening.
fans can be divided into10 specifications according to the impeller angle, each type of blades can be mounted by 15°, 20°, 25°, 30°, 35°
3. Production Parts
The standard configuration of this type of fans are generally consist of the following product parts:
case, impeller, air inlet, motor, system integral pedestal, main shaft, driving system (bearing house, bearing), coupling
4. Parameters of Product Performance
Impeller Type | Driving Mode | Spindle Speed (r/min) | Air Volume (m3/h) | Total Pressure (pa) | Motor (kw) |
4 | Coupling | 2900 | 3242 - 5660 | 1882 - 2093 | 4 |
4.5 | 4613 - 8059 | 2392 - 2589 | 7.5 - 11 | ||
5 | 6332 - 11055 | 2951 - 3197 | 11 - 18.5 | ||
5.6 | 8896 - 15531 | 3703 - 4011 | 30 | ||
6.3 | 1450 - 2900 | 6333 - 22114 | 1167 - 5080 | 5.5 - 55 | |
7.1 | 1450 | ` | 1333 - 1686 | 11 - 18.5 | |
8 | 12969 - 27477 | 1696 - 2147 | 18.5 - 30 | ||
9 | 18465 - 39122 | 2147 - 2716 | 30 - 45 | ||
10 | 25330 - 53666 | 2922 - 3422 | 55 - 90 | ||
11.2 | 960 - 1450 | 23561 - 68762 | 1608 - 4295 | 30 - 160 | |
12.5 | 730 - 1450 | 24097 - 104816 | 1157 - 5344 | 22 - 250 | |
14 | 730 - 960 | 35586 - 93596 | 1716 - 3187 | 37 - 160 | |
16 | 53119 - 139712 | 2235 - 4167 | 75 - 280 |
5. maintenance of blowers
Blowers can run based on complete normal conditions
Please check every part of blower is regular or not after repairing.
Clearing fan and gas pipeline internal dust at regular period, dirt and impurities such as water, and to prevent rust
Repairing cannot going at running period.
6. Notes
If the discovery of flow is too large, and not fit for the request or short time need to smaller flow, can use the throttle device adjusted.
Inspect the thermometer and oil mark sensitivity at regular period.
If there is off-normal occurrence happen when blower drive, stop and rotate,should repair it as soon as possible.
if there is small glitch, should check it, and repair it.
In addition to every time after repairing should be oil change outside, still should be regularly oil change
7. Producing utility
CNC Plasma Cutting Machine
Cases Welding
Dynamic Balancing Adjusting
8. Certificate
CE ,ISO9001
9. Export Record
Romania, Saudi Arabia, Egypt, Iran, Philippine, Vietnam and Russia
10. Order Requirement
We will appreciate it a lot if you can offer us your product performance requirements and operation environment, so that we can customize optimal production to meet your every requirement.
1) Air volume
2) Total Pressure or Static Pressure
3) Voltage and Frequency
4) Medium Temperature and Density
5) Altitude of Operation Place
11. Export Market Distribution
| South America | USD 13,910 | 0.17 |
| Eastern Europe | USD 25,715 | 0.3 |
| Southeast Asia | USD 5,320 | 0.06 |
| Mid East | USD 41,610 | 0.49 |
| Eastern Asia | USD 788,310 | 9.35 |
| Western Europe | USD 52,855 | 0.63 |
| Northern Europe | USD 17,700 | 0.21 |
| Domestic Market | USD 7,486,802 | 88.79 |
12.Installation requirement
1. when Install the blower, the weight of the gas transmission pipeline should not be add in the casing, according to the drawings corrective air inlet and impeller gap between size, and keep axis horizontal position
2. When Install air inlet pipe, you can directly use air inlet itself bolt connection, the air inlet of fixed by three countersunk screw
3. Diffuser be installed into a certain Angle, back cover properly rotary can keep plate in a horizontal position.
4. After installation, rotating rotor by hand or lever, checking whether there is too close or collision phenomenon, in the absence of these phenomena when square test run
used for industrial portable blower fan with CE