Features of SZF linear Vibrating screen: 1. Good tightness, little dust spills. 2. Less energy consumption, 3. low noise

Linear vibrating screen uses vibrating motor as vibration source. Materials on the sieve tosse and then leap forward in a straight line, so as to achieve the purpose of screening and grading the materials. Low energy consumption, high efficiency, simple structure, easy maintenance, fully closed structure without dust scattering.

ZSF series linear vibrating screen are very useful in plastic, rubber, ceramic, food, pharmaceutical, chemical, fertilizer, glass industries. Vibratory screens can be provided with dust proof cover as required. ZSF series linear vibration screen can be supplied of different sizes depending upon capacity required. They can also handle slightly wet material. Inlets, outlets and legs can be custom fit to your installation requirements.

Model	Size(mm)	Material size(mm)	Inclination	Amplitude(mm)	Layer	Power(KW)
SZF-520	500×2000	0.074-10	0-7 degree	4-10	1-6 layer	2*(0.4-0.75)
SZF-525	500×2500					2*(0.4-0.75)
SZF-1020	1000×2000					2*(0.4-0.75)
SZF-1025	1000×2500					2*(0.4-1.1)
SZF-1030	1000×3000					2*(1.1-1.5)
SZF-1040	1000×4000					2*(1.1-1.5)
SZF-1235	1000×3500					2*(1.1-2.2)
SZF-1250	1200×5000					2*(1.1-2.2)
SZF-1535	1500×3500					2*(1.1-2.2)
SZF-1560	1500×6000					2*(2.2-3.7)
SZF-1845	1800×4500					2*(2.2-3.7)
SZF-2050	2000×5000	0.074-15				2*(2.2-3.7)
SZF-2260	2200×6000					2*(2.2-3.7)

Installation and Adjustment1. Motor should be fastened on the mounting surface which must be smooth and flat.

2. Adjust the vibration force.When the motor rotation direction doesn’t meet requirements, you can adjust the power phase sequence.

3. The machine is running early, which should be checked at least once a day to prevent loosening.

4.The machine running time add up 1500 hours, you should check the bearings, if there is a serious injury should be immediately replaced.

 Daily maintenance:

1. Before running

   (1) to check coarse mesh and fine mesh if there is a damage

   (2) each group clamps is locking.

2.Running

   (1)notice any abnormal noises

   (2)electric current is stable

   (3)whether the vibration is abnormal.

3. After running

   (1)after used clean up the vibration every time

   (2)to inspect regularly the coarse mesh , fine mesh and the spring if there are fatigue and damage

   (3)whether each part of the vibrating body caused damage due to vibration.

   (4)need to add the site to be the lubricating oil

 Notes

    According to our client's needs, our company can design and manufacture sieve machine of special models and specifications. Our company shall reserve the right to modify all technical information and size.

SZF Linear Vibrating Screen Hot selling