Welcome to ECVERY
J-SAP-M-04D break glass manual fire alarm call point
J-SAP-M-04D break glass manual fire alarm call point
Supplier Info
[China Supplier]
Contact Person : Mr. Zhang Ming
Tel : 86-755-33876556
Fax : 86-755-33876538
Product Detail
J-SAP-M-04D call points 1.Rated voltage:DC24V 2.Maximum current: 8A 3.Weight:200g 4.Contat resistance:0.5

J-SAP-M-04D  break glass manual fire alarm call point

Technical Parameters 

 Type J-SAP-M-04D                   
 Rated voltage DC24V
 Maximum current 8A
 Colour yellow
 Weight 200g
 Contat resistance ≤0.5Ω
 Temperature -10°C~+50°C
  

  

Operating Intustration

J-SAP-M-04D is a kind of universal manual call point according to the GA5-91 standard. It has simple structure, well-designed, easy to install, reliable quality characteristics, and can be widely used as an alarm start switch of fire alarm systems in buildings, or as a switch on other special condition.

J-SAP-M-04D manual call point is easy to operate. When the fire happen, just need to break the break glass, the alarm signal will be sent to the alarm host system to active the fire alarm bell and other fire linkage equipment.

In addition, J-SAP-M-04D can be taken regular inspection when the fire alarm system is in monitoring condition. Insert the special key into the testing hole on the right side of manual call point, which has the same effect as break the break glass.

             

J-SAP-M-04D break glass manual fire alarm call point

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.