VoIP Asterisk PCI card TE210P supports both telephony and data modes. TE210P has daul ports E1/ T1/ J1 / PRI interfaces supporting PRA signaling, HDLC, PPP and Frame Relay data modes, and any combination thereof. With the VoIP Asterisk card TE110P, you can easily build your IP-PBX or Carrier system .
Interfaces:2 X E1/T1/J1 interfacesPCI 3.3v interface
Features:
Two PRI port 60 channels Hardware DTMF detectionConference BridgePCM bus connectors (PCM30, PCM64, PCM128)4 dual-color LEDs (layer 1 state indicators)Active channel switching (across multiple cards over the external PCM bus)PRI ISDN protocol stackSuitable for 3.3 volts 32 bit PCI 2.2 slots
Applications:ISDN PRI PBXISDN least cost routerVoice over IP PRI gatewaysVoIP integration of ISDN equipmentPBX to PBX trunkingIVR
Data Modes:Cisco HDLCHDLCPPPMultilink PPPFrame RelayVoice Modes:EuroISDNAT&R 4ESSLucent 5ENational ISDN2
Specification:
1. Configuration
Motherboard:TE210Paccessory: RJ45 TO BNC cable
2. Hardware and Software Requirements:
CPU 800+ MHZ
RAM >=128MB
Linux kernel 2.4.X or 2.6.X
3. Dimensions
Size(mm) 165*106*172
net weight(g) 160
4.packing:
--Package material:paper box
--Package Size(mm) 210*140*35
--Gross Weight(g) 240g
IIT TE210 Dual Ports E1 / T1 PCI 3.3v Interface asterisk card IDSN PRI card Openvox digium te210p TrixboElastix VOIP IPPBX