1.waste oil recycling system (solid or liquid state of waste oil) 2.high oil yield rate 3.reactor quantity:4 pieces

Waste Oil Recycling System (solid or liquid state of waste oil)

1.The parts: Kettle-type reactor, distillation tower, catalytic reaction,fractionating column, condenser, oil-water separator, gas-oil separator, oil purifier, storage area, and output oil tank.

2.The raw material: used engine oil (waste mineral oil), waste rubber oil, residue oil, heavy oil, 180# diesel oil.  

3.Model NO.: QY WL-22                      

Furnace: (diameter*length): 2200mm * 5400mm                      

Capacity: 15 Tons (The quantity of raw materials you can put into the furnace per time.)

Superior Oil Quantity: 10.5 Tons per furnace (It takes 38 hours for one circle)       

 

Remark:

1) The extracting rate is based on the waste oil, if the oil content of the waste oil is higher, the extracting rate will be much higher relatively.

2) A whole set of our equipment contains 4 oil tanks, and they work continuously, which means when the first oil furnace begins to generate oil gas, the second oil furnace starts to run taking the oil gas generated by the first oil furnace as fuel, and when the second oil furnace begins to generate oil gas, the third one starts to run taking the oil gas generated by the second furnace, the rest can be deduced by analogy. So when the complete process is finished (here we take Model QY WL-22 as an example), which takes you 38 hours, the superior oil you can get from the waste oil is about: 10.5Tons/Tank × 4 Tanks = 42 Tons. Simply speaking, you can get 42 Tons in 38 hours.

5.the reference photo of waste oil recycling system:

Waste Oil Recycling System (solid or liquid state of waste oil)