Iron and Manganese Removal filter Unit 1.CE/ ISO/ NSF etc 2.Factory,best price with best quality 3.Easier delivery time

Iron and Manganese Removal Unit 1.CE/ ISO/ NSF etc 2.Factory,best price with best quality 3.Easier delivery time

Iron and Manganese Removal Unit

Working Principle of the iron and manganese Removal Unit

Iron and Manganese Removal Unit utilizes the oxidation method to oxidize the low valence iron ion and manganese ion to high valence ions which will be removed by absorption and filtration so as to achieve the purpose of to reduce iron and manganese content in water.

Features the iron and manganese Removal Unit

1,Aerator part do not need addition of chemical and activator,only need to add a small quantity of air which can reduce operation cost.

2,The main body of equipment combines strong oxidation reaction, separation method sand remover, grouping suspended pound into one unit. The materials fall into two categories: carbon steel and stainless steel.

3,The filter part equipped with self-back flush unit, do not need back flush pump, which can lessen floor space,  and reduce cost. 

4, Pressure-type filtration has higher back flash intensity which can have the filter layer washed evenly, clearly,  lower back-flash time and longer filtrating period,  and extend the filter-media service time.

5,The equipment can supply water to end-user or water supply pipeline directly,  do not need clean water tank and secondary pump station,  which can reduce investment and avoid secondary pollution. 

Application the iron and manganese Removal Unit

The equipment mainly is applied in high content of iron and manganese water area, in order to use the ground water as water source.

Technical performance the iron and manganese Removal Unit

 Air and water mixing time: 3-5min; 

Filtration Speed: 10-14m/h; 

Back flush Intensity;  14-18 L/m2 second

Filter layer thickness:  1.0-1.2 meter

Working pressure:  0.2-1.0 MPa

Application scope the iron and manganese Removal Unit

inlet water: iron content≤20mg/L,manganese ≤10mg/L

Outlet water: iron ≤0.3 mg/L, manganese ≤0.1 mg/L.

Specification and dimension the iron and manganese Removal Unit

Parameter/Specification.	10T/h	15T/h	20T/h	25T/h	30T/h	40T/h	50T/h	60T/h	70T/h	80T/h	90T/h	100T/h
1(MM)	1000	1200	1400	1600	1800	2000	2200	2400	2500	2600	2800	3000
2(MM)	1300	1500	1700	1900	2100	2300	2500	2700	2900	3000	3200	3450
3(MM)	850	1000	1200	1300	1500	1700	1800	2000	2080	2160	2330	2500
4(MM)	DN50	DN65	DN65	DN80	DN100	DN100	DN125	DN125	DN150	DN150	DN150	DN175
5(MM)	1200	1400	1600	1800	2000	2200	2400	2600	2800	2900	3200	3500
h(MM)	3500	3650	3750	3850	3950	4150	4270	4530	4630	4720	4850	4990
m(T)	1.50	1.80	2.10	2.85	3.20	3.70	4.20	5.60	6.33	6.62	8.29	9.36

Iron and Manganese Removal filter