Ro system 1. 5 STAGE RO SYSTEM WITH BOOSTER PUMP 2. MEMBRANE: TFC 50 GPD 3. RO SYSTEM,RO SYSTEM EQUIPMENT 4. RO EQUIPMENT

Ro system:

Features:

Compact design to save space Quick and easy installation Inexpensive and proprietary quick change filters. System comes with 3.2 Gal (TKE-3200W) FLR-520 chrome plated faucet Optional plastic/metal 3.2Gal (TKE-2400P) Installation hardware suppliedeNote:Pump system available 110V/60HZ, 220V/50HZ transformer QSF-25003: 12", 5M, PP sediment cartridge QCB-25001: 12", Carbon block cartridge QGA-25002: 12", GAC carbon cartridge QME-25050: 12", 50GPD membrane cartridgepecifications

Mineral Water Project Mineral Water / Packaged Drinking Water Plant Bottled Water Treatment Plant Water Treatment Plant

MINERAL WATER PLANT:

  AGUAPURO offers the STATE-of-the-ART complete Mineral Water Plant to produce water quality as per Water regulatory standards.  Complete System is the combination of various PRODUCTS to produce desired Water Quality.

 Water Source:  Water should be collected from the source which should be well protected, available easily, un-contaminated. Sources can be anything viz. Bore well water Line, Closed Ring Well, Municipal Supply Line or Other source where treatment is possible.Water Transfer  Water is transferred to Raw Water Storage Tanks using proper pumping system and un-contaminating piping work. Either Submersible Pump or surface mounted Centrifugal pump can be used with good quality UPVC or CPVC or SS piping can be used for this application.Water Treatment System:

 Complete Purification system comprising of

·         Raw Water feed Pump

·         Chlorine Dosing system

·         Multi Media Filtration for Coarse filtration

·         Activated Carbon Filtration

·         Water Softening / Anti Scalent Treatment Process

·         Reverse Osmosis Or Nano / Ultra Filtration

·         Purified Water Storage in Stainless Steel tank

·         Transfer Pump in stainless steel

·         Micron Cartridge Filtration (0.2 Micron)

·         UV Sterilization

·         Ozone Disinfection

 Water Process Description:

 

  Raw water is chlorinated or Ozonated to oxidize the organic impurities (kill bacteria and virus). This water is passed through Multi Media Filter with the help of Feed pump of suitable capacity to remove suspended impurities followed by Activated Carbon Filter to remove excess chlorine (de-chlorination), odour, colour and turbidity due to colloidal suspended impurities and organic impurities.  De chlorinated water is then dosed with Anti Scalent Solution to avoid scale formation on the membrane or passed through Softener to remove hardness. Softened water is further passed through 10-micron cartridge filter to remove micron particles to avoid clogging of the RO membrane and to improve the silt density index. Water further passed though RO Unit which is complete with High Pressure Pump, Membranes with Pressure tubes, Electrical control panel and wet panel, piping with valves and all the required accessories viz., pressure switch, solenoid valve etc. Reverse Osmosis unit will reduce the dissolved Salts up to 95% of the In feed TDS. Treated water from RO unit will be stored into SS tank.   This treated water is then passed through 0.2 micron cartridge filter before it is taken for the filling. Ozonator unit producing ozone gas is installed in series at the outlet of UV System to provide residual effect of ozone to the water.Water Testing Facility:Purified Water is tested using IN HOUSE Water Testing laboratory Where Chemical and Micro Biologically Water is tested for Chemical and Micro Biological parameters. For this, a complete full fledge Water Testing CHEMICAL and MICRO BIOLOGICAL Lab is required. However, water is also tested for Pesticide and Radio-nuclear parameters in outside Bureau of Indian standards approved laboratory.Laboratory RequirementS:

 

Chemical Lab	Min 150 sf ft Room / Shelves, Cup-boards (Your Scope)All Required Chemicals and ReagentsGlassware / PP WareInstruments as per BIS
Micro-Biology Lab	Min 150 sf ft Room / Shelves, Cup-boards (Your Scope)All Required Chemicals and ReagentsInstruments as per BIS

   This state-of-the-art Under Sink RO system was designed by our engineers with the most modern materials and technologies to produce a truly affordable and reliable water treatment device.

The semi-manifold assembly was designed to save your labor costs and to lessen the possibility of leaks in the field.

   The standard 4-stage system comes with a sediment filter, GAC filter, carbon block and a 50 GPD membrane.

   The system is competitively priced with conventional under-sink RO systems. An optional inline 5th filter is available with GAC or any custom media you desire.

Stages RO system with Pump