AWWA Standard Water Meter Bottom Load Positive Displacement Bronze body or brass body U.S.Gallon, M3, Cubic Feet NPT thread

Application

Measuring the volume of cold potable water passing through the pipeline.

Features

--Operating on a rotary piston principle

--Low starting flow rate and excellent metrological performance

--Magnetic drive, lower transmission resistance

--Copper sealed-register and heat-treated glass to eliminate dirt, moisture, infiltration and lens fogging.

--The register can be replace without removing the meter from the line.

--The register has a straight-reading odometer type display and a 360 test circle with center sweep hand, 

  a low flow test dial hand, a leak indicator.

--A 360-degree polymer basket strainer protects the measuring elements from damage.

--The main case if made of lead free bronze.

--The main case with NPT threaded ends has wrench pads to aid installation.

--The main case with flanged ends has a test port to permit in-line testing.

Compliance with Standard

-- Technical data confirms to AWWA C700 Standard

AWWA Standard Water Meter - Bottom Load Positive Displacement - 1"