AWWA Standard Water Meter - Multi-jet Bottom Load 2" Bronze body or brass body, U.S.Gallon, M3 or Cubic Feet

Application

Measuring the volume of cold potable water passing through the pipeline.

Features

--The meter is a velocity-type meter

--Magnetic drive, lower transmission resistance

--Copper sealed-register and heat-treated glass to eliminate dirt, moisture, infiltration and lens fogging.

--The register can be replace without removing the meter from the line.

--The register has a straight-reading odometer type display and a 360 test circle with center sweep hand, 

  a low flow test dial hand, a leak indicator.

--A 360-degree polymer basket strainer protects the measuring elements from damage.

--The main case if made of lead free bronze.

--The main case with threaded ends has wrench pads to aid installation.

--The main case with flanged ends has a test port to permit in-line testing.

Compliance with Standard

-- Technical data confirms to AWWA C708 Standard

AWWA Standard Water Meter - Multi-jet Bottom Load - 2"