Welcome to ECVERY
Supplier Info
[China Supplier]
Contact Person : Ms. Li Julia
Tel : 86-0-13914781109
Fax : 86-25-84801979
Product Detail
Classification: Chemical Auxiliary Agent CAS No.: 9003-05-08 Other Names: polyacrylamide MF: CH2CHCONH2
Classification:Chemical Auxiliary AgentCAS No.:9003-05-08Other Names:polyacrylamide
MF:CH2CHCONH2Purity:≥ 88%Place of Origin:Jiangsu China (Mainland)
Type:flocuulantUsage:Coating Auxiliary Agents, Leather Auxiliary Agents, Paper Chemicals, Petroleum Additives, Textile Auxiliary Agents, Water Treatment ChemicalsBrand Name:XST
Model Number:XST-P001polymer:anionic polyacrylamidepolyacrylamide:anionic PAM
chemical auxiliary agents:flocculantflocculant:organic flocculant
Packaging & Delivery
Packaging Detail:The solid product is packed in inner plastic bags and further in polypropylene woven bags with each bag containing 25Kg. The colloidal product is packed in inner plastic bags and further in fiber plate drums with each drum containing 50Kg or 200kg.
Delivery Detail:Within 15 days after the L/C or other payment.

1. high dewatering rate, low dosage, can greatly reduce the cost. 2. water solubility can dissolved in water with any proportio 

GB 17514-2008

CAS No. 9003-05-8


Anionic polyacrylamide is a kind of soluble high molecular weight polymer or polyelectrolyte. Having several polar groups in the molecular chain, it can form bridge among particles by absorbing suspended solid particles in wastewater and condense particle into big flocs by neutralizing charges. Therefore, it can speed up sedimentation of particles in suspensions and excels in speeding up purification of solutions and promoting filtration and so on.


Anionic polyacrylamide is of full product lineup and can serve various demands. It is of good solubility and can easily dissolved in cold water. Small dosage product of this series can achieve great flocculation generally speaking, 0.01-10ppm will bring its effect to the fullest. Use it in conjunction with inorganic flocculants (poly-ferric sulfate, poly aluminum chloride, poly-ferric chloride salts etc.) can achieve even better result.



This series excels in flocculation. For its performance in purification, clarification, sedimentation promotion, filtration promotion, thickening, and other aspects, it can satisfy demands in various fields like wastewater treatment, liquid waste disposal, sludge thickening and dehydration, mineral separation, coal washing, and papermaking.

Application Method & Notes:

1. It is recommended to prepare the product in water solution at 0.1% concentration. It is proposed to use the neutral and desalted water.

2. The product should be scattered evenly in the stirred water, and the dissolving can be accelerated by warming the water (below 60°C).

3. The most economical dosage can be determined based by a preliminary test.

4. The solid product is packed in inner plastic bags and further in polypropylene woven bags with each bag containing 25Kg. The colloidal product is packed in inner plastic bags and further in fiber plate drums with each drum containing 50Kg or 200kg.

5. This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35°C.

6. The solid product should be prevented from leaking on the ground because the hygroscopic powder can make the floor slippery.


Related Products
Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.