Fiber materials | Polypropylene-PP Polyethylen-PE |
Shell materials | UPVC |
Fiber dimesions | OD. 0.5mm/ ID. 0.4mm |
Fiber filtration model | External force (Outside-In filtration) |
Fiber membrane area() | 115 |
MWCO(Daltons) | 10000-100000 |
Initial flux(t/h) | ≥9.5 |
Tab/Well water designed flux(t/h) | 3.5-4.5 |
Surface water designed flux(t/h) | 3.0-3.5 |
Grey/Waste water designed flux(t/h) | 2.5-3.0 |
Feed turbidity required | <100NTU |
Filtrate SDI | <2 |
Filtrate turbidity | <0.2NTU |
TOC removal rate | 5-40% |
Removal>0.2um particles | 100% Under MWCO 80000 dalton |
Coliform removal | Not found in each 100ml water sample |
Bacteria removal | Not found in each 100ml water sample |
MAX.feed pressure | 0.3Mpa |
MAX.pressure drop | 0.2Mpa |
Recommendatory pressure | 0.06-0.15Mpa |
Operating temperature | 5-45 |
PH range | 1-14 |
Operating model | End flow or cross flow |
Water treatment UF membrane