1)IMO Final Approval 2)Treatment capacity from 100~5000m3/h 3)CCS Type Approval 4)Suitable for all ship types and sizes

The treating process of BalClorTM BWMS is mainly consisted of the following three procedures:

Filtration ---The ballast water is filtrated by an automatic backwashing filter with 50µm screen to remove marine organisms larger than 50µm.

Disinfection --- A small side stream of the filtered ballast water is delivered to the electrolytic unit to generate the oxidants of high concentration (mainly sodium hypochlorite solution), then the oxidants are injected back into the main ballast stream to provide effective disinfection.

Sodium hypochlorite solution as a very effective germicide can be kept in ballast water for a certain period to effectively kill the plankton, spores, larvae and pathogens contained in the ballast water to meet D-2 standard.

Neutralization --- The residual TRO level of the treated ballast water below 0.1ppm, then the treated ballast water can be directly discharged. If the residual TRO level of the treated ballast water over 0.1ppm, neutralizer (sodium thiosulfate solution) is added into the de-ballast pipe to neutralize residual oxidants instantly automatically.

Specification of BalClorTM BWMS System

Model	Treatment Capacity (m3/h)	Flow Rate to Electrolyzer (m3/h)	Required Power (AC KVA)	Dimension
				Electrolysis Unit L(mm)×W(mm)×H(mm)	Filter L(mm)×W(mm)×H(mm)
BC-300	100-300	6	15	2500×1800×2200	788×698×1800
BC-500	301-500	6	25	2600×1800×2300	860×780×1905
BC-1000	501-1000	12	50	2900×2300×2200	1090×950×2475
BC-1500	1001-1500	20	75	3000×2600×2100	1245×1123×2615
BC -2000	1501-2000	20	100	3300×2500×2200	1350×1228×2780
BC -2500	2001-2500	36	125	3500×2900×2400	1350×1228×2780
BC -3000	2501-3000	36	150	3500×2900×2400	1525×1335×3395
BC -3500	3001-3500	36	175	3800×2400×2500	1565×1460×3585
BC -4000	3501-4000	36	200	3800×2400×2600	1565×1460×3585
BC -5000	4001-5000	45	250	4000×2800×2600	1845×1585×3860

Ballast Water Management Technology