TL series horizontal sand filters are made of polyester reinforced with fiberglass; they are totally anti-corrosive.

TL series horizontal sand filters are made of polyester reinforced with fiberglass; they are totally anti-corrosive, and have high mechanical, chemical and thermal resistance. Higher quality water is achieved with their greater filtering capacity. Indexes of turbidity and contaminants of the filtered water are reduced due to their increased retention capacity. The time between backwashes increases proportionally with the height of the filter bed, meaning there are fewer interruptions in filtration, and lower water consumption, because the number of backwashes needed is decreased and there is less erosion of the filtering material.

A horizontal filter is the ideal choice in cases where a great volume of water is to be treated, and in cases which require optimization of the available space, as a single horizontal filter can substitute up to 3 vertical filters of the same diameter simply by increasing its length.

TECHNICAL DATA:
Model	Height	Length	Outlet	Filer  area	Flow	Sand WT.*
	(mm)	(mm)	(mm)	(m²)	(m³/h)	(kg)
Diameter 1200mm
TL121900	1390	1900	90	1.96	39	1100
TL122300	1390	2300	90	2.42	48	1425
TL122500	1390	2500	90	2.65	53	1750
TL122700	1390	2700	110	2.87	57	2075
TL123000	1390	3000	110	3.21	64	2325
Diameter 1400mm
TL141900	1600	1900	110	2.23	45	2100
TL142500	1600	2500	110	3.02	60	2825
TL143000	1600	3000	110	3.67	73	3450
Diameter 1600mm
TL161900	1830	1900	110	2.47	49	2850
TL162500	1830	2500	110	3.36	67	3875
TL163000	1830	3000	160	4.1	123	4750
Diameter 1800mm
TL182500	2050	2500	160	3.74	112	4850
TL183000	2050	3000	160	4.58	137	5925
TL183500	2050	3500	160	5.41	162	7000
Diameter 2000mm
TL202500	2220	2500	160	4.34	130	6575
TL203000	2220	3000	160	5.3	159	8025
TL203500	2220	3500	160	6.25	187	9475
TL204000	2220	4000	200	7.21	216	10925
TL204500	2220	4500	200	8.16	245	12375

TL series sand filter