Technical data
Name | WJW1670903 |
Material&Diameter | Warp:polyester monofilament yarn(0.70mm) |
Weft: polyester monofilament yarn(0.90mm) | |
Weight(g/m2) | 1270 |
Thickness(mm) | 2.0 |
Density(counts/10cm) | Warp: 141 |
Weft: 47 | |
Air permeability(L/m2.S) | 3664 |
Bursting strength(N/5x20cm) | Warp: 9845 |
Weft: 6050 | |
Elogation(%) | Warp: 37.7 |
Weft: 50.53 |
Name | WJW1670904 |
Material&Diameter | Warp:polyester monofilament yarn(0.70mm) |
Weft: polyester monofilament yarn(0.90mm) | |
Weight(g/m2) | 1370 |
Thickness(mm) | 2.0 |
Density(counts/10cm) | Warp: 150 |
Weft: 52 | |
Air permeability(L/m2.S) | 3575 |
Bursting strength(N/5x20cm) | Warp: 9780 |
Weft: 6070 | |
Elogation(%) | Warp: 35.5 |
Weft: 49.5 |
Usage
WJW1670903:applicable for sludge dewatering of enviroment protection.
WJW1670904:applicable for metallurgy, mining and sludge dehydration.
Advantage
Our sludge dewatering fabric have a character of good water and gas permeability, but don't leak mud, it's specialized for sludge dewatering and waste water treatment. mud tend to peel off by our fabric, so it's easy to clean and have long operating life,because of the special heriingbone structure of our fabric.
we always use clipper joint for our sludge dewatering fabric, it's easy to install in all kinds of filter press, our clipper joint is very fastness because we use import glue, we also do resin edge reinforcement for our fabric, so our quality is perfect.
Product picture
Our joint and seam
Clipper joint
Other kinds of joint
(self pin joint--endless joint--spiral joint)
Resin edge treatment
Conducting bar reinforcement
Our production processing
(warping--wear buckle--knitmesh--once heat setting--seaming--twice heat setting--edge treatment--package--finish)
Our package
Wooden box
Bag
Filter press and job site
Our certificate
polyester sludge dehydrating fabrics