Tube oil skimmers
Operating Principle
The tube oil skimmer works according to the oleophilic collector tube. Oil sticks to a continuous loop-oil collector tube, which is made of flexible, special composite plastic that is resistant to high temperature and repels water. The collector tube flops so that it breaks through crusted oil or grease and makes these contaminants adhere to the outer surface. The oil-covered oil collector tube is constantly being pulled through nitrile or ceramic scrapers. Oil has been scraped off flows into the oil collection reservoir below the oil skimmer. After returning to the liquid surface, the clean oil collector tube collects more oil. By constant circulation of the oil collector tube, the liquid surface is kept in motion, and the oil floats toward the oil collector tube. Thus, it is removed from the entire surface of the basin.
Key Features
lCompact design fits almost any tank or pitDo not suffer level floating influenceMultiple installation modesSimple and effective drive designFrom the influence of floaterLong service lifeTube length according to your needOperating temperature -40°C—90°CLiquid PH value 0-14Specifications
Type | Removal of light oils | Removal of medium oils | Removal of heavy oils | Motor (KW) | Weight (KG) | Size(mm) L*W*H |
JLOS-T8 | 15L/H | 34L/H | 151L/H | 0.04 | 8 | 305*203*229 |
JLOS-T15 | 36L/H | 92L/H | 216L/H | 0.2 | 16 | 650*175*260 |
JLOS-T20 | 53L/H | 129L/H | 303L/H | 0.2 | 23 | 650*258*480 |
JLOS-T25 | 76L/H | 189L/H | 454L/H | 0.2 | 30 | 914*508*305 |
Tube sizing chart
Skimmer height above high water level(cm) | Length of tube(cm) | ||
JLOS-T8 | JLOS-T15 | JLOS-T8 | JLOS-T15 |
JLOS-T20 | JLOS-T20 | ||
JLOS-T25 | JLOS-T25 | ||
30 | 90 | 210 | 490 |
60 | 150 | 275 | 730 |
90 | 240 | 335 | 790 |
120 | 300 | 395 | 920 |
150 | 365 | 460 | 1100 |
180 | 430 | 520 | 1220 |
240 | 490 | 640 | 1340 |
275 | 550 | 700 | 1466 |
300 | 610 | 760 | 1590 |
Above 300 | Above 610 | height×2+180 | height×2+500 |
Tube oil skimmer