Welcome to ECVERY
A-S model Industrial sand filter for wastewater treatment
A-S model Industrial sand filter for wastewater treatment
Supplier Info
[China Supplier]
Contact Person : Mr. Mi Zhangju
Tel : 86-10-57465012
Fax : 86-10-69736588
Product Detail
1.High filtering precision 2.Automation control 3.Convenient installation 4.High flow sand filter for industrial

Working principle

A-S 660 series sand filter which use quartz sand as a filter medium is a high efficiency filter, It can effectively remove the suspended substance, microorganisms, and other fine particles in water. Ultimately achieve to reduce water turbidity, purify water quality. When the filter work normally, sewage through the water inlet to the dielectric layer, then a majority of the contaminants trapped in the medium surface, fine dirt and other floating organic matter trapped in the medium layer. When the impurity in the water and suspended matter reaches a certain amount of time, the filter system through the differential pressure control device for real time detect the pressure difference between inlet and outlet. When the pressure reaches the certain value, the electric control PLC send signals to the three way solenoid valve of control system. The three way electromagnetic valve through a water automatic control corresponding to the filtering unit three way valve, closing the inlet channel and at the same time to open the discharge channel, because the discharge channel less pressure, other filtration unit of water in water under pressure from the outlet of the filter unit to enter, and continued to scour the filtration unit of the dielectric layer, thereby achieve cleaning the medium effect, after rinsing wastewater under the action of water pressure by the filtering unit of the sewage outfall into the sewage pipe,then complete a sewage process. This kind of filter can also be used for timing control of sewage, when time reaches the set time timing controller, electric control box issued a clean signal to the three electromagnetic valve, the discharge process as above.

Technical parameters

Single filter water flow: 50m3 / hPressure rating: 0.25Mpa~2.5MpaWorking temperature range: 0 ~ 65 °CEffluent turbidity:less-than threeInlet and outlet Connection: flangeBackwash water: for total filtered water 1 to 3%Control mode: pressure control; PLC timing control;Installation: vertical, horizontal
Model

D(mm)

D1(mm)

H(mm)

H1(mm)

weight(Kg)

filter area(m2)

The clean water

(m³/h)

S605

300

37.5

116.5

150

42

0.07

2-5.6

S610

400

50

1105

180

45

0.12

4-9.6

S620

500

25-75

1210

180

47

0.2

8-16

S635

625

50-100

1200

180

58

0.3

12-24

S640

750

50-100

1070

300

125

0.44

17-35

S650

900

50-100

1110

300

197

0.63

25-50

S660

1200

50-100

1110

300

290

1.13

45-90

Size chart

A-S model Industrial sand filter for wastewater treatment

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.