Features: 1) Material: SS304/316L; 2) Surface: mirror finish; 3) Cartridge length: 10, 20, 30, 40 inches;

Main features:

1.100% stainless steel 304 with mirror polish on the housings

2.Accept 3-160 elements in 10.20.30.40 inch length

3.Clamp type and flange type can be choosen

4.Support legs are available

5.The screw thread or the flange are applied to inlet and outlet connection

6.The housings are suitable for FIN222 or FAT226

7.Max operating pressure:100psi ,150 psi and 180psi available

 

Customized products are available
Fiter housing material		Stainless steel 304,316L
Connection way		Screw thread,flange,quick
Working pressure		0.1 Mpa to 0.4Mpa
Filtration precision		0.1 micron to 100 micron
Available Cartridge Sizes
10”	20”		30”	40”

It is mainly composed of filter cartridges, shell, fixture and measuring devices.The fluid flows from the filter entrance into the filter cartridges, with themiscellaneous quality piece retained on the surface or deep in, while clean fluid runs off from the outlet. Filters adopt a flange to lock the ears.They are very convenient for operation. With female or sanitary clamp connected in the top cap, it is used to install the gauge or platoon air valve, and female mouth at the bottom is used to clear fluid flow mouth for the filters. The inlet and outlet is connected with female mouth.Micro filters are a kind of equipment of high accuracy. They are very convenient for operation. This kind of machine is made of SUS304 or SUS316 stainless steel.

Cartridge Filter Housing