Welcome to ECVERY
1KG 2KG 3KG 5KG 5KG water cooling ozone generator with oxygen or air source for water treatment
1KG 2KG 3KG 5KG 5KG water cooling ozone generator with oxygen or air source for water treatment
Supplier Info
[China Supplier]
Contact Person : Mr. GZ Ozocenter
Tel : 86-20-38246009
Fax : 86-20-62862023
Product Detail
1KG 2KG 3KG 5KG 5KG water cooling ozone generator with oxygen or air source for water treatment

1KG 2KG 3KG 5KG 5KG water cooling ozone generator with oxygen or air source for water treatment

1. Technical Description

1. Use enamel tubes for the core parts of ozone generator. The anti-force capability of resistant electricity is much better than glass and ceramic tubes.

2. In order to ensure the safety and continuously operating of ozone discharge, each discharge cell is equipped with separated safety appliance. Single discharge unit failure does not affect the normal operation of other units.

2. Discharge chamber

1. Use stainless steel for the case, resistant to rust & corrosion, and can effectively prevent the cooling water fouling.

2. Use of the technology of automatic intelligent Cold Expander. Precise control the space of stainless steel external electrode with tube plate, preventing dangerous of air leakage, water leakage.

3. High frequency of power supply

1. LED digital keyboard control.

2. Precise setting the Voltage and Working frequency. Output frequency resolution can be up to ± 0.1Ht. Voltage Precision ±1V.

3. Has a perfect overload, automatic current-limiting, overpressure, short circuit, lack of phase and power-off protection.

4. SPWM modulation technology. Power factor COSθ can be 0.9.

5. Using PI technology for controlling power supply. So can realized the Compare specified rate with feedback quantity, through the closed-loop to stabilize the output voltage, constant the power frequency.

4. High voltage transformer

1. Using Mn-Zn ferrites for magnetic core. Small wastage of iron core / low Resistivity / low temperature coefficient / high rate of dynamic permeability under high frequency working condition.

2. Using special cables of high frequency & stranded conductor to reduce the skin effect of high-frequency current.

3. Using high vacuum epoxy resins encapsulation technology for the Transformer which can highly improving the performance of resistance breakdown and preventing the surface corona discharge of transformer.

5. Control system

Use PLC control system, easy control of the water temperature, water flow rate, electrical parameter and pressure etc, and ensure the safe operation of the system.

1KG 2KG 3KG 5KG 5KG water cooling ozone generator with oxygen or air source for water treatment

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.