1.Special V shape pore capillary UF membrane 2.Unique module structures 3.Superior filtration efficiency and durability

Tripure capillary UF membrane  owns a unique pore structure, having a reliable performance and good flux recovery. It is produced by cooperation with Germany Berghof at Germany technology and strict quality control.

The capillary UF membrane  has an obvious advantages on wastewater treatment and more promising properties on water purification of power station and steel factory,proved by many partners in USA, EU, Japan, Mid-east, South Asia and China.

Product Description:

Membrane Material	Modified Polysulfone(PS)
Membrane Configuration	Capillary
Normalized Filtration Pore Size	0.01 μm
MWCO(Dalton)	50,000
Potting Material	Epoxy
Housing Material	UPVC/ABS
Preservative	Glycerin

Application Data:

Typical Filtrate Flux	40~80 L/m2·h (85~204 GFD)
Maximum Applied Feed Pressure	0.5MPa (73 psi)
Maximum TMP	0.2 5MPa (36 psi)
Maximum Backwash Pressure	0.1-0.15MPa (30 psi)
CIP NaCIO Concentrate	500 ppm
Chlorine Tolerance	250,000
Maximum Feed NTU	5 NTU
Maximum Feed SS	20ppm
Operating Temperature	5~50°C (41~113°F)
Operating pH Range	2~12
Operation Mode	Dead-end or cross-flow
Feed/Permeate	1.5-3

Typical process conditions:

Backwash Flux	170~250 L/m2·h (119~255 GFD)
Backwash Duration	30 seconds
Backwash Frequency	20~30 minutes
CEB Frequency	1-3month one time
CEB Duration	2~20 minutes
Cleaning Chemicals	NaClO or H2O2, NaOH, HCl, citric acid or oxalic acid

Module specificaiton: 

MODEL	MEMBRANE ID(mm)	MEMBRANE AREA(m2)
8P-1.2V	1.2	20.9
8P-1.2V-XL	1.2	28.4
10P-1.2V-XL	1.2	42.7

Advantages of V-shape Capillary UF membrane:

-High Strength

Tripure V-shape UF membrane is made of long chain hydrophilic material modified PS with special technology and strict quality control standards, owning excellent anti-explosive and stretching characteristics. The explosive pressure reaches up to 10 bar.

-Higher fulx & stable operation

Tripure V-shape UF membrane owns a unique pore structure with lower membrane resistance. Flux recovery is 20%-30% higher than similar products, due to its long molecular material.

-Anti-fouling & anti-oxidant

It has an obvious advantage on cleaning and flux recovery, due to the special technology.

Application:

-Ground water&mine water

-Surface water

-Boiler feed water

-Sea water desalination pretreatment

-Municipal waste water

-Industrial waste water

-Recirculation waste water

-Textile waste water

-Chemicial waste water

-Pesticide waste water

-High concentrate waste water

Tri-High Technical/technological support:

-Bench-scale and pilot testing

-Process design

-Service and maintenance training

-System trouble shooting

-Technology Support(start-up and operation)

-Module fouling analysis and cleaning

References:

( function(){ var aBigImageSrc = [ 'http://i01.i.aliimg.com/photo/v0/643501697_1/10P_1_2V_XL_capillary_UF_membrane.jpg' , 'http://i01.i.aliimg.com/photo/v0/643501697_2/10P_1_2V_XL_capillary_UF_membrane.jpg' , 'http://i01.i.aliimg.com/photo/v0/643501697_3/10P_1_2V_XL_capillary_UF_membrane.jpg' , 'http://i01.i.aliimg.com/photo/v0/643501697_4/10P_1_2V_XL_capillary_UF_membrane.jpg' , 'http://i01.i.aliimg.com/photo/v0/643501697_5/10P_1_2V_XL_capillary_UF_membrane.jpg' , 'http://i01.i.aliimg.com/photo/v0/643501697_6/10P_1_2V_XL_capillary_UF_membrane.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); 10P-1.2V-XL capillary UF membrane for waste water treatment