HH-M10 Mixing Tube,mix ozone into water 3-10 tons per minute, PVC tubing, PVDF body, Teflon ball, Kel-F seat, Hastelloy-C spring
BEYOKozone mixing systems are used for maximum mass transfer efficiency. The injector produces a cavitation effect, enabling the ozone gas to join the water stream in the form of extremely tiny bubbles. These bubbles must be as small as possible in order to increase the ratio of bubble surface area to the amount of ozone entering the water. |
|
Specifications: |
| Capacity: | | 1 GPM @ 15 PSI Inlet Pressure (3-10 ton) | Water Inlet & Outlet Dia: | | DN50 | Suction Port: | | 1/2-in barb shank & 1/2-in MNPT | Construction Material: | | PVC tubing, PVDF body, Teflon ball, Kel-F seat, Hastelloy-C spring | Check Valve: | | Included - in the suction port | Supply Water Requirement: | | Water temperature between 0-60,water PH value between 5-11 | Dimension (LxWxH): | | 3.7" x 2.3" x 1.5" (95x58x39 mm) | Net Weight: | | -lb (kg) |
|
| |
Features: |
Check valve included in injection portQuick installationDurable PVDF constructionCompletely ozone compatible |
Benefits: |
|
Application: |
HH-M10 venturi mixer