Welcome to ECVERY
2012 best selling DEL/DEM weigh feeder
2012 best selling DEL/DEM weigh feeder
Supplier Info
[China Supplier]
Contact Person : Mr. jun Hong
Tel : 86-371-86226198
Fax : 86-371-86226198
Product Detail
Belt easy replacement Measuring accuracy by belt affect little Signal field processing Automatic detection and automatic zero

A=ROLL CENTER DISTANCE

B:BELT WIDTH

G=MACHINE WEIGHT

User dataTechnics Number226 WF02226 WF03
Material namePowder, granule,block medium material
   
Normal feeding rate (t/h)"9-153-6
volume weight           (m3/t)   1400-22001400-2200
fineness               (mm)
moisture               (%)
control temperature               (oC)  
Feed accuracy           (%)≤±0.5≤±0.5
belt width          (mm)650500
Roller Spacing      (mm)27002700
Feed maxhineDEL0627T6DEL0527T6
Electrical installation position and other  
 
Main configuration and the specificationFeed maxhineDEL0627T6DEL0527T6
endless-belt     (mm)650×6000500×6000
weighing sensor     (England TEDEA)355355
Motor, reducer0.75KW0.75KW
power(SEW)
Speed sensors in the head (Germany TURCK)Bi1.5Bi1.5
valve dia           ( siemens)MM 420-75/3MM 420-75/3
power supply24V24V
jointFSK 0054FSK 0054
isolator0~240~24
Field control box   (Schneider device assembly)FSG060FSG060
Field junction boxFAK050FAK050
instrument             (Germany schenck original)INTECONT PLUS VEG20610/VDB20600
Supporting electrical 
control cabinet:600×600×2000mm Two machine an ark
Special shielded cable 
    
weight 660kg580kg
 
PackingLENGTH*WIDTH *HIGHTH3500x1400x10003500x1250x1000
   
   
   
   

  DEL/DEM dosing machine series:

 Use and suitable scope:

DEL/DEM speed dosing scale (namely belt constant tonnage feeder or feeding machine) is to press the German SCHENCK technology production, set feed conveyor, weighing measurement and quantitative control for an organic whole, mechanical and electrical integration of high-tech products. Can adapt to all kinds of industrial production environment of the powder, granule, massive simple material continuous feeding measurement and automatic control batching system. Widely used in building material, metallurgy, electric power, chemical industry, light industry and other industrial production department .

Composition: Including dosing machine and control of two parts, the control is divided into instrument control and DCS control concentrated in two ways .

The main performance parameters are as follows:

Measuring accuracy (equivalent) : is better than the 0.5%;

Feeding capacity: 1000 t/h,

Feed the adjusting range: 1:10;

Use environment: Temperature: instrument - 50 ~ 50 °C;

Scale body - 30 ~ 50 °C;

Relative humidity 90% or less.

 Power supply: ~ 220 v / 50 hz (instrument part).

The mechanical structure of a few features:

DEL/DEM type dosing machine in mechanical structure and some of the following characteristics. 1, belt easy replacement. As long as the tension device loosen belt, mobile side support, namely the belt to replace it. 2, the measuring accuracy by belt affect little. With belt automatic tensioning device, tension basic constant, JianZhi weighing sensor maximum displacement is only 0.2 mm, the belt tension on measuring accuracy influence can be neglected. 3, for different material or different process requirement, can use different feed hopper, and keep-off plate and matching discharge valve. 4, belt and between rollers have plough type sweeper, belt outside scraper, and with a rubber edge, can remove belt surface adhesion material. 5, in the belt both sides have belt limit switch, when belt run offset touches limit switch, through the microcomputer issued a warning signal. Six, in the frame on the belt tension standard scale, can be very convenient on belt tension adjustment .

Instrument controller key features:

 1, suitable for single and DCS distributed control system. Simple structure, the price is cheap. Big small and medium-sized enterprise all can use.

2, advanced microprocessor technology, linear digital processing and PID control way, to ensure reliable operation; Fast response, control stability.

3, signal field processing to current mode on the output and anti-jamming technology, ensure robust, the system long-term stability.

4, automatic detection and automatic zero to tare. Ensure higher feeding measuring accuracy.

5, a variety of standard signal communication, a variety of control mode, can be convenient and DCS control system connected. 6, has manual/automatic operation, power-fail protection, the limit alarm, etc comprehensive function. Operation, commissioning, maintenance is simple and convenient. .

Centralized control management system key features: 1, suitable for 3 to 8 table or more table feed scale of feed measurement and batching system of centralized control. High reliability, strong function and convenient operation is easy. 2, in order to ipc for hardware, match with the research of the modular software system, stable and reliable, comprehensive functions. 3, combining management and process control for an organic whole, the whole Chinese interface, split-screen display running state be clear at a glance, Operation, modify parameters is simple and convenient. 4, equipped with standard input/output interface, can analog signal or standard such as serial port communication protocol way.

2012 best selling DEL/DEM weigh feeder

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.