Welcome to ECVERY
welding flux ZT.HJ131
welding flux ZT.HJ131
Supplier Info
[China Supplier]
Contact Person : Mr. Xu Ricky
Tel : 86-0634-6219317
Fax : 86-0634-6219012
Product Detail
GUIDELINES FOR USAGE: 1.Dry the flux at 250aa for 2 hours before use. 2.Completely remove rust, oil and dirt from the groo

ZT.HJ131(NO Manganese-Oxide fused flux)

 DESCRIPTION:ZT.HJ131 is a fused type no manganese-oxide flux with pumiceous granule of white to gray color , about 10-60 mesh in size. It is suitable for use with AC or DC power source and shows good welding usability. APPLICATIONS:   It is recommended to use for welding of Nickel base alloy thin plates with Nickel base wire. GUIDELINES FOR USAGE:1.       Dry the flux AT 250°C for 2 hours before use.2.       Completely remove rust, oil and dirt from the groove surface prior to welding. TYPICAL FLUX COMPOSITION RANGE(%)  







welding flux ZT.HJ131

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.