Welcome to ECVERY
welding flux ZT.HJ230
welding flux ZT.HJ230
Supplier Info
[China Supplier]
Contact Person : Mr. Xu Ricky
Tel : 86-0634-6219317
Fax : 86-0634-6219012
Product Detail
welding flux ZT.HJ230T. 1.Dry the flux at 300-350 for two hours before use Equivalent to AWS-5.17 F6A2-EL12 F7A2-EM12

ZT.HJ230 (NO Manganese-Oxide welding flux)


 In accordance with GB/T5293-1999 F4A2-H08MnAEquivalent to AWS F6A0-EM12 DESCRIPTION:     ZT.HJ230 is a fused type no manganese-oxide flux with vitreous granule of gray color, about 8-40 mesh in size. It can be used on AC or DC power source. It provides good welding usability and good bead appearance. APPLICATIONS:   This flux is primarily used for welding of carbon and low alloy steel structures in combination with H08MnA and H10Mn2 wires. GUIDELINES FOR USAGE:1.Dry the flux at 250°C for 2 hours before use.2.Completely remove rust, oil and dirt from the groove surface prior to welding. TYPICAL FLUX COMPOSITION RANGE:(%)
FLUX&WireoombinationBase MetalóbMPaóaMPa5%AKv(J)






welding flux ZT.HJ230

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.