Ads by Google
♣ Soldering Torch ♣
Details of Product:
| Model No: | JD-8020 | Igniion Pattern: | Piezo
Ignition |
| Product Weight: | 136g | Connection Type: | Bayonet type |
| Product Size: | 166mm*48mm*60mm | The maximum flame length | About 220mm |
| Product Material: | Copper+Zinc alloy+Stainless steel+Plastic | The minimum flame length | About 20mm |
| Product Packaging: | Single-sided blister, Paper card, Within the box outside the box ,100a/box | The best flame length | About 185mm |
| Product's Diameter: | 18mm | The flame's size | Thick (Can be adjustable) |
| Product's Clamp Diameter: | 48mm | The flame's form | Concentrate |
| The Best Fuel | Liquefied butane gas (purity no less than 95%) | The Burning time | About 200 minutes |
The best flame length Parts Name:
Application:
1.It's suitable for restaurants and household to make food. |
2.Unfreeze meat and water pipe |
3.Picnic |
4.Farming and gardening |
5.Use for the heat-shrinkable sleeves and their connectors |
6.Be applied in microwelding involving copper-welding,sliver-welding,tin-welding and ornament processing. |
7.Fusing,welding,surface treatment and local heating in workshop,garage and lab. |
8.Architetural decoration |
Installment
Tighten up the knob clockwise, There are two bayonets on the gun ,Make the first bayonet seize the rim of the butane gas cylinders, Then aim the second at the socket of the cylinders and press down, Turn gun body about 25 angle clockwise until being fasten on the cylinders
Ignition
keep the gas cylinders upright,Revolve the knob about 1/4 turn counterclockwise and then press the switch to ignitie.If unsuccessful ,adjust outley amount of gas by the knod and try again, Flame size is adjustable
Outfire
Turn the knob clockwise until the fire is extinguished.
Removing
Contrarotate gun body to initial position (about 25 angle) and draw up until it breaks away the cylinders
Warnings
1.Don't aim the gun at everyone and any animal |
2.The gun barrel is very hot during and after work ,don't torch or close to any combustible materials with it |
3.It must be control by hand |
4.Placing the gas cylinders upside down is prohibited |
Maintenance:
1.Check the appliance is clean and dry |
2.Separate the torch from gas canister for your safety |
3.Do not disassemble or re-construct |
4.Contact dealer,If you have problems |
Multi Purposes Butane Heating Torch Welding Torch