1.oxy-gasoline cutting system 2.best way to cut steel 3.cutting thickness 3~300mm 4.save 80% cost than acetylene 5.with CE

Cutting speed:Cut thick sheets quicker than acetylene;

Oxygen consumption:1.2--1.5Cube/KG;

Slag:very little and easy to remove;

Gap quality:smooth, with a small area affected by heat;

Possible hole depth<250mm;

Stack cutting:15 stacked layers of 10mm sheets can be cut at one time;

Cutting under water is possible;

Back-flash:No back flash when the volume density of gasoline in oxygen is in the flammabilitu range o 1.7--6%.No need for back-flash arrestor;

Fuel tank:The tank is filled with military blast-proof material.It is safe when caught in fire;

Cost:By using gasoline instead of acetylene for cutting, the cost can be reduced by up to $1.50 prt hour of use;

No pollution and not harmful to operators;

10M rubber twin-hose (the red one for gasoline and the blue one for oxygen);

Cutting thickness:100 - 300mm

semi-auto gasoline Cutting Torch system