3D Four wheel Alignment Garage Equipment info:
The movie program, through interactive 3D graphics, displays the sequence of the operations
neccessary for a correct adjustment of the vehicle, This program is also accessible during
adjustment procedures.
Good software Make Alignment Easy as 3 step only.
1. Select Vehicle Make and Mdel
Vehicle specifications can be easily selected three ways:
A. Scroll through the specifications list.
B. Enter the vehicle Identification Number.
C. Typing in the first letters of the vehicle name.
2. Measure Angles
After compensation, camber, front and rear toe, and thrust line measurements are displayed.
Caster, S.A.I and I.A are displayed following caster steer.
3. Adjust Vehicle
Patented bar graph shows the amount and direction of adjustment required. As you make adjustments,
the arrow moves across the bar graph. The bar graph changes from red to green as the alignment adjustment
comes within specification.
Fast Measurement: This proven technology is matched with easy to use software that will have your technicians getting readings in 2 minutes. Now that's fast!
Easy to Operate: Captures targets automatically.
High Accuracy: 3D imaging technology to reduce setup and measurement times and generate serious productivity benefits. Accuracy can reach 0.01°
912-3D Technical data:
Measuring Items | Accuracy | Range |
Precision | 0.01mm/0.01° | / |
Caster | ±0.05° | ±20° |
S.A.I | ±0.02° | ±20° |
Toe | ±0.02° | ±20° |
Camber | ±0.02° | ±10° |
Total Toe | ±0.02° | ±10° |
Thrust Angle | ±0.02° | ±5° |
Set back | ±0.02° | ±5° |
Max.Steering Angle | ±0.08° | ±50° |
Track Width | ±0.64cm(±0.25cm) | <265cm(<105in) |
Wheel Base | ±0.64cm(±0.25cm) | <533cm(<210in) |
Our Alinger will enable you to :
Make More MONEY!
High accuracy 3D Four wheel alignment Garage Equipment