This series Wire Drawing Machine consist of Dry-drawing Machines,Water-tank Drawing Machines of vareties and Auxiliary Facilities,suitable for drawing low&high carbon steel wire,brass & aluminium wire which are the main materials for production of galavanized iron wire& nails,wire nettings,wire ropes,Cable Wire and etc.New models of revised designs sre also possible upon request.

The drawing equipment consists of main reduction box, die casing, wheel frame, wire brace and electeical control system. The spinning drawing blocks are driven by JZT or Y series motor, with gear coupling runs changeful gears to reduce speed. The drawing blocks are verticaly fixed in sealed box body. The gear are lubricated with oil.In order to lower residual heat on the surface of the block, the cooling means is installed in interwall of the block.The machine runs with carwl or linkage. The safety halt gear is installed by the position of operating block

Usage:This drawing machines is a ideal equipment drawing wire stock of high, medium and carbon steel, as well as copper, alumium, and alloy.The machines are applied to drawing wire in the factories such as wire-steel factory, metal mesh factory and nail making factory etc.

Material intensity: over 128kg/m°

Max dia. Of material: 3.4mm

Min dia. Of material: 1mm

Dia. Of block: 1-7/450

Max average condensation: about 20%

Total condensation: about 77.9%

Max speed of block: 346.9m/min

Total power: 7.5-11kw

Weight: 1500kg

Overal size: 1520*810*1700mm

Wire drawing machine