FE1-4ETHA

1. Name and Function

Name: FE1-4ETHA

Function: 1).It is a switch Ethernet bridge and E1 transmission equipment

          2). High performance, small size, low cost and self-learning Ethernet Bridge which is suitable for the cost-sensitivity bridge application. It can study MAC destination address from the connected LAN constantly and determine whether forward or filter according to destination Mac address of data frames.

               3). The desktop and the rack share the same composition and function. The rack can insert 15 pieces of card and two power cards with heat back up function.

2. Technology Parameters

Power supply:                  180 VAC~260 VAC Or -38 VDC ～ - 72 VDC

Power consumption:         < 5W (desk style)

                                        <75W (rack style)

Operating Temperature:         0°C ～ 50°C

Storage Temperature:           -40°C ～ +70°C

Relative Humidity:                   95%

Atmospheric pressure:           70kpa ～ 106kpa

Dimension: Two types for desktop:

218mm*136mm*44mm

Two desk-type devices which are placed side by side and inserted in suitable bracket onto side slots can be mounted on standard 19-inch rack

251.8mm*141.6mm*47.5mm

Rack dimension: 483mm*165mm*177mm (can be mounted on standard 19-inch rack)

NO CAUSTICITY GAS, NO DUST, NO MAGNETIC FIELD DISTURB

3. Features

1)      Voltage select: desktop supports both AC200V and DC -48V; mounting rack: AC200V or DC -48V can be available with heat backup and support mixed insertion different cards.

2)      Support long packet at 1600 bites and ISL.

3)      Ethernet interface with 10M half/full duplex, 100M half/full duplex, 10/100M auto-negotiation.

4)      Offer two loop functions: loop back to local port, remote loop back to E1; complete pseudo-random code testing function makes installing and adjusting more easily.

5)      Support Vlan and have the endpoint isolation function.

6)      offer two timepieces: master and slave

7)      Supporting cross cable and direct connecting cable auto-negotiation

8)      Support four Ethernet interface at most to save a Ethernet converter.

9)      When receiving the alarm of Los, EISYL, AIS in the E1 channel or Ethernet interface linking down, it will turn off the Ethernet interface automatically and use the backup line.

10)   Desk device and rack device share the same card.

11)   Support SNMP.

4.application

FE1-4EthA protocol converter