Ads by Google
Product featuresHigh performace:Because of the high stability, high power output and 2x2MIMO technology, the AN2 can realize higher transmission speed and longer transmission distance;
High transmission Speed:The actual maximum data transmission speed can be up to 150Mbps, which can meet the requirement of high data throughout;High power output for longer transmission distance:High power output(500mW) improves the receiving sensitivity of the whole system. The transmitting range can be up to 50km;Flexibility for networking mode:AN2 supports many kinds of networking mode such as: point to point, point to multi-point. It can be used as a wireless bridge or switch;High technology for crypto security:Supporting WEP, WPA, WPA2 encryption, MAC address filtration;Easy installation:Because of easy installation, users can set the whole system easily without any special tools.
Technical featuresSignal strength can be shown by different colour bars;2×2MIMO technology improves the spectrum utilization and strengthens the performace of data transmission;Visual signal strength showing by colour bars and numeral reading;advanced frame aggregation model to improve spectral efficiency,Increase the effective data transfer rate;Support CPE end-user mutual isolation;intuitive device with color-coded signal strength display panel,The colors represent the signal strength value can be user-defined,convenient for installation and commissioning;Support 5M/10M Bandwidth;
Support frequency extension function, 40Mhz of dual channel binding can effectively improve communication performance;proprietary frequency transfer function ,possible to avoid same frequency interference problem,at the same time strengthen wireless network privacy and safety;
user controllable CPE channel scan list,upgrading CPE scanning speed, speed up the connection time to the AP;bottom-line flow control function,The effective realization of the balance for the flow of connection channel;
Practical PING watchdog reset function,can try to restore communication by using system automatically reset in an exception;Based on MAC address, ACL(access control list) can effectively improve the system safety and Prohibit unauthorized access;support the bridging mode and routing mode;Support STP(Spanning Tree Protocol);
firewall within, rich in user-defined function of filtering table;Support PPPoE virtual dial-up, can use ADSL-peer network for remote connections;supports multicast (Multicast) routing function;Support dynamic frequency selection (DFS) technology;
Compatible with802.11a/n standard protocol wireless terminals;Support SNMP agent;
Support TELNET,SSH service;Support remote logging.
| System information | |
| CPU spec | Atheros MIPS 24KC,400MHz |
| Memory spec | 64MB SDRAM,8MB FLASH |
| Network interface | One 10/100M Ethernet interface(5 type cable,RJ45) |
| Certificates | |
| Wireless module standard certificate | FCC Part 15.247, IC RS210, CE |
| RoHS certificate | support |
| Transmission range | |
| LOS (with outdoor antenna) | >50Km |
| Physical Spec/Power supply properity/Environmental requirement | |
| Size | 16cmL×8cmH×3cmW |
| Weight | 0.5kg |
| RF connector | 2 RP-SMA (waterproof) |
| Outline design | outdoor portable U/V type groove |
| Power consumption | 6watt |
| Working power supply | 24V DC,1A,(POE) |
| Power supply mode | POE(4,5+;7,8-) |
| Working temperature | -30°C~75°C |
| Working humidity | 5%~95% |
| Shakeproof standard | ETSI300-019-1.4 |
| Working frequency range: 2412-2462 MHz |
wireless network bridge