Welcome to ECVERY
8 E1 PDH multiplexer optical fiber converter
8 E1 PDH multiplexer optical fiber converter
Supplier Info
[China Supplier]
Contact Person : Mr. Ray Alex
Tel : 86-20-85521526
Fax : 86-20-82189311
Product Detail
1.optical multiplexer,optic fiber transceiver,4/8/16 E1 PDH multiplexer 2.three years warranty 3.small order

PDH optical transceiver

HS-OPT series PDH optical transceiver ,which is based on super large scale integrated circuit ,a point to point ,link circuit ,loop optical transmission equipment . It can supply 4/8/16/24 interfaces ,one channel 100M ethernet interface ,one channel order wire phone ,perfect alarm monitoring function high integration level ,low power consumption ,stable performance ,convenient to use .Fourthermore, it can supply perfect network management function .

Product features

1.realize CPE(customer premises equipment ) remoting monitoring to DTE ( data terminal equipment )

2.supply order E1 opposite terminal loop back function ,optical home terminal self-loop function

3.supply one channel order wire phone interface

4.two fiber bidirection ,single fiber bidirection ,optional

5.meet the carrier-class demands ,the average non-malfunction working time exceed 10 thousands hours

6.high reliability ,supply the types of 19 inch rack mounting ,desktop ,wall-hung ,and insert-card

7.three types of power supply mode : 220VAC,-48VDC,+24VDC

8.transmission distance : 2~120Km

9.networking management function of SNMP

Technical parameters

Optical fiber interface

1.fiber type : single mode fiber ,muti mode fiber ,optional

2.wave length : 1310nm,1550nm,850nm,optional

3.optical fiber interface : SC,FC ,ST optional

4.optical path code : 1B1H

5.optical module : single fiber ,duplex fiber ,optional

6.receiving sensitivity : superior to -36dBm

7.optical power output : -8 dBm ~-15dBm

RS232 interface

1.working pattern : < 19.2Kbit/s asynchronous serial interface

2.interface type : RJ45

E1 interface

1.interface code :HDB3

2.interface code rate : 2.048Mbit/s±50ppm

3.interface feature : ITU-T G.703

4.interface impedance :75 Ωunbalance/ 120Ωbalance

5.interface type : BNC

Ethernet interface

1.interface rate : 100M auto-adapt

2.interface protocol : IEEE802.3,IEEE802.3U,IEEE802.1d

3.physical interface : RJ45

Power

Voltage : AC180V~AC240V DC-36V~72V

Power consumption

Operating conditions

1.operating temperature : -10degree to 50 degree

2.storage temperature : -40 degree to 70degree

3.relative humidity : 5%-95% non condensing

4.barometric pressure : 86~106Kpa

5.dimension : 9 inch standard of 1U 483*140*45mm

8 E1 PDH multiplexer optical fiber converter

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.