The MC260 is a CDMA wireless module developed by Flyscale. It offer interface for voice transmission, SMS and data operation, also integrates the complete RF circuit, CDMA Base Band coprocessor, and recharging circuit that it adapt to open up CDMA wireless product. for example,it can be used at mobile telephone,PDA,PCMCIA wireless modem card,USB wireless modem,wireless pos machine,wireless data transmission and so on.
44.5(±0.2) x 35.4(±0.2) x 2.6(±0.15) mmClass Cellular CDMA radio section running under 3.8 Volts3V R-UIM interfaceBattery chargerEcho Cancellation + noise reductionCDMA2000 1X support, offering data rates up to 153 kbps on the forward and reverse linksFull CDMA software stackComplete shieldingComplete interfacing:Power supplySerial linkAudioR-UIM cardKeyboardPCM interfaceGeneral ADCLCD (not available with AT commands
Feature | Implementation |
Power supply | Single supply voltage 3.4V – 4.2V |
Power saving | Typical power consumption in SLEEP mode to <8.0mA |
Frequency bands | CDMA800 |
Transmit power | -50dBm<CDMA800<24dBm+0.5dB |
Temperature range | Normal operation: -30°C to +60°C Storage temperature -40°C to +85°C |
SMS | MT, MO, CB, Text and PDU mode SMS storage: R-UIM card |
R-UIM interface | Supported SIM card: 3V |
External antenna | Connected via 32Ω antenna connector or antenna pad |
Audio features | EVRC |
serial interfaces | RS232 |
Phonebook management | Supported phonebook types: SM, FD, LD, RC, ON, MC.Phonebook storage: ME(100) and R-UIM card. |
Physical characteristics | 44.5(±0.2) x 35.4(±0.2) x 2.6(±0.15)mm<11g |
FAX | Group 3 Class 1 |
Real time clock and calendar | Implemented |
Timer function | Programmable via AT command |
Firmware upgrade | Firmware upgradeable over serial interface |
Connector | Spring 60 pins board-to-board |
Audio interface | 2 microphone inputs and 2 speaker output |
AT Command | Implemented |
MC260 CDMA Module