Welcome to ECVERY
With universal shaft and high speed Four side moulder for woodworking
With universal shaft and high speed Four side moulder for woodworking
Supplier Info
[China Supplier]
Contact Person : Ms. Zhong Helen
Tel : 86-757-27755123 27732961
Fax : 86-757-27732960
Product Detail
This Four side moulder used to making any high quality wood products. With universal shaft and high speed. STANDARD CONFIGURATION:1. This adopts step-less material feeding, material feeding speed ranges from 7m/min to 28m/min.2. Each principal axis adopts independent drive to electric motor, features stronger cutoff force.3. Adjusts for principal axis integrates at central or frontal side, features easy operation.4. Galvanized workstation features superior abrasion resistance.5. Equips with auxiliary unit alarming lack of material, it effectively improves smooth feed-in while lack of material.6. Active roller below improves feeding efficiency.7.  Pneumatic pressing feeding roller section by section adjusts for pressing force, it favors for smooth feed-in of different thicknesses of timber.8. Adopts central charging system, features convenience and promptness.9. Equips with world-class electric element, features superior stability.10. With fully sealed safety protective cover, this effectively avoids flying logging debris and noise blocked, and even acts as safety protection. 
Machine ParameterHorizontal Lifting0.75KW/1HP
Working Width25-230 mmFeeding Motor5.5KW/7.5HP
Working Thickness8-150 mm General Power54.75KW/73HP
Working Table Length1950 mmCutter Diameter /mm
Feeding Speed7-28 m/min1st Lower Shaftφ125 mm
Main Shaft Diameterφ40 mmRight Vertical Shaftφ125~φ180 mm
Main Shaft Revolution6000 r/minLeft Vertical Shaftφ125~φ180 mm
Pneumatic Source Pressure0.6 MPa1st Upper Shaftφ125-φ180 mm
Motor Power 2nd Upper Shaftφ125-φ180 mm
1st Lower Shaft 7.5KW/10HP2nd Lower Shaftφ125-φ180 mm
Right Vertical Shaft7.5KW/10HPRemarks/mm
Left Vertical Shaft7.5KW/10HPFeeding Wheel Diameterφ140 mm
1st Upper Shaft11KW/15HPDust outlet Diameterφ140 mm
2nd Upper Shaft7.5KW/10HPPhysical Dimension4168×1635×1735 mm
2nd Lower Shaft7.5KW/10HP  

With universal shaft and high speed Four side moulder for woodworking

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.