minirouter,HSD spindle,NSK bearings, CEcertification,Germany ball screw for homeshop sign makers &craft.

mini wood engraver,furniture router,woodworking machine

Suitable Materials

1. Z Travel is 4 inches/100mm The column is adjustable up and down by loosing 4 capscrews, giving more table clearance if needed. Up to 4 inches/100mm of clearance under the collet. l2. The MAXS0609 comes standard with a Chinese 6mm collet. ER16 Collet system will adapt to this machine and can be purchased from independent dealers.

  

PARAMETERS

 

NO.	Discription	Parameter
1	X,Y,Z Working Area	600x900x100mm
2	Table Size	720X1140mm
3	X,Y,Z Traveling Positioning Accuracy	±0.03/300mm
4	X,Y,Z repositioning Positioning Accuracy	±0.02mm
5	Table Surface	T-slot Extrusions
6	Frame	Cast Aluminum
7	X, Z Structure	Ball Screw
8	Y Structure	Hiwin Rail Linear Bearings and Ball Screw
9	Max. power Consumption	0.8Kw
10	Max.Rapid Travel Rate	6000mm/min
11	Max.Working Speed	4000mm/min
12	Spindle Power Motor	1.5Kw self-coolant spindle
13	Spindle Speed	0-24000RPM
14	Drive Motors	Stepper Motors
15	Working Voltage	AC220V/50/60Hz (Option: 380V)
16	Command Language	G code
17	Operating System	WinCnC PC Software /DSP System
18	Interface	PCI / Parelle Port / USB
19	Flash Memory	128M(U Disk for DSP system only)
20	Collet	ER16
21	X,Y Resolution	<0.01mm
22	Software Compatability	Type3 software, Wentai software, Artcam software
23	Running Environment	Temperature: 045 Relative humidity: 30%75%
24	Packing Size	1380x1080x850mm
25	Net Weight	115KG
26	Gross Weight	202KG
All parameters above subject to change without prior notice

,

mini wood engraver