Ball Screw Nc Studio Engraving Machine JCM 1212-4
Features:
1. Genman-imported high precision , pre-tightening Ball Screw Rods on XYZ axes ,minimize the gap caused by moving , more precise than rack and pinion .
2. Four spindles can work at the same time , thus ,improving the working efficiency four times , or separately .
3. With breakpoint memery , insuring proceeding with the work after stopping the work caused by accident or the next day .
4. Gantry-moving , strengthen the surface ,durable ,long life ,without deformation , high accuracy of reposition .
5. Using quality sensor switch, improve the machine working safty .
Ball Screw Nc Studio Engraving Machine Parameter :
NO. | Features | Parameter | Parameter | Options |
1 | Travel Size | X | 1200mm | <2000mm |
Y | 1200mm | <4000mm | ||
Z | 120mm | <380mm | ||
2 | Accuracy | Working precision | 0.04mm | |
Reposition Precision | 0.05mm | |||
3 | Structure | Surface | T-SLOT | Vacuum |
X,Y,Z | Ball screw rods on XYZ Y:Square rails XY: Round Rails | |||
4 | Speed | Max Air Move Speed | 12000mm/min | |
Max working Speed | 6000mm/min | |||
5 | Spindle | Spindle power | 1.5kw 4 sets | 2.2kw |
Spindle Rotating Speed Rotating speed | 0-24000r/min | |||
6 | Motion | Stepper | Servo | |
7 | Voltage | AC380V/50Hz | ||
8 | Dictate of Operation | G code | ||
9 | Controller | Nc Studio | DSP |
Samples:
Look for agents all over the world!
Ball Screw Nc Studio Engraving Machine1212-4