1.Introduction
1*Trimming margin machine is widely use on the wooden material process and laminted wood, Special for the timber slitting or burst.
2*It is sectional type for the working table, customer can adjust the width according to needs,
3* its easy to control and high efficiency.
4* Checking by infrared ray, Rubber roller chain for feeding (for different wood)
2.Technical Parameter
Trimming Margin Machine | ||||||
Specifications | MJ-4003 | MJ-4003N | MJ-4005 | |||
Min. working width | 30mm | 30mm | 30mm | |||
Max. working width | 400mm | 400mm | 400mm | |||
Min. working length | 300mm | 300mm | 300mm | |||
Max. working length | 2000mm | 2000mm | 2000mm | |||
Min. working height | 8mm | 6mm | 8mm | |||
Max. working height | 30mm | 30mm | 50mm | |||
Feeding power | 0.375kw | 0.375kw | 0.375kw | |||
spindle power | 5.5kw | 5.5kw | 7.5kw | |||
Total power | 5.875kw(7.9HP) | 5.875kw(7.9HP) | 7.875kw(7.9HP) | |||
Speed control | 9m/minute | 6m/minute | 3.6m/minute | |||
Dimension | 750*850*650mm | 750*850*650mm | 750*850*650mm | |||
Saw blade | 180*2.4*20T*35H | 185*2.6k*22T*35H | 190*2.6K*24T*35H | |||
Net weight | 200kg | 200kg | 250kg |
3. Application
This machine is widely use on the wooden material process and laminted wood,special for the timber slitting or burst.
It is sectional type for the working table,customer can adjust the width according to the needs,its easy to control and high efficiency,Checking by infrared ray, rubber roller chain for feeding(for different wood)
4.Working picture
Feeding and outing system
1,Laser, Infrared calibration
2,Auxiliary Frame, adjustable, helping you chooses the wood width.
5.Auxiliary Assembly
1.Switch: Intelligent operation interface,easy to operation.
2.Saw blade: Use the high quality import saw blades, heat-resisting,wear
resisting,never deformation.
3.Bearing: Adopt the famous international brand, Clean heating assembly.Main spindle with high flexible degree and long life.
Speed switch: It can control the material forward stroke or retreat.
Speed controller
Motor: It is mainly used to produce the drive torque, as with electrical or all kinds of mechanical power supply.
Laser
Saws:
RUIMA Trimming Margin Machine and surface planer wood machine membrane press