1.We supply various kinds of Polypropylene Film Capacitor, 2.AC Capacitor,Power Capacitor

Key Features 1, small size, light weight: Due to metalized polypropylene membrane as medium, size, weight of only older products, 1 / 4 and 1 / 5. 2, low loss: less than 0.1% of actual value, so the capacitor's own low energy consumption, less heat, low temperature, long service life, good energy-saving effect. 3, excellent self-healing properties: over-voltage caused by the media, local self-healing breakdown quickly and resume their normal work, so that greatly improved reliability. 4, Security: built-in self-discharge resistance and the device. Capacitor discharge resistor can automatically vent let go of power brought; when the capacitor fails, the safety device in time to disconnect the power, to avoid the failure of further development, to ensure safe use. 5, no oil spill: The use of advanced semi-solid capacitor impregnant, drop melting point higher than 70 °C, in the course is not spill to avoid environmental pollution, the capacitor will not result in oil loss and failure. Primary Specifications conditions: ambient temperature -25 °C ~ +50 °C, humidity ≤ 85%, an altitude of 2000 meters. Rated voltage: 250VAC, 400VAC, 525VAC, 690VAC, 750VAC, 1050VAC. Rated capacity: 1 ~ 100kvar. Capacity tolerance: -5 ~ +10% Dissipation factor: rated voltage in the frequency, 20 °C when tgδ ≤ 0.1%. AC withstand voltage: 2.15 times rated voltage between poles 10 seconds, most shell between 3kV10 seconds. Maximum allowable over-voltage: 1.10 times rated voltage. Maximum allowable over-current: 1.30 multiples of the rated current. Self-discharge characteristics: plus 2 Un capacitor DC voltage, disconnect the power after three minutes, the remaining voltage down to 75V or less. Standard: GB12747-2004 IEC60831-1996 Main Specifications

ModelBSMJBCMJBZMJ	RatedvoltagekV	Ratedoutputkvar	TotalcapacitanceμF	RatedcurrentA	DimensionsL × W × H(mm)
0.25-3-1	0.25	3	153	12	167×57×110
0.25-5-1	0.25	5	255	20	167×57×180
0.25-7.5-1	0.25	7.5	382	30	160×85×210
0.25-10-1	0.25	10	509	40	270×120×210
0.25-15-1	0.25	15	764	60	270×120×210
0.25-20-1	0.25	20	1019	80	270×120×210
0.25-25-1	0.25	25	1273	100	270×120×210
0.25-30-1	0.25	30	1528	120	270×120×230
0.25-35-1	0.25	35	1783	140	270×120×230
0.25-40-1	0.25	40	2037	160	270×120×230
0.4-2-3	0.4	2	39	2.9	167×57×110
0.4-4-3	0.4	4	79	5.8	167×57×110
0.4-6-3	0.4	6	118	8.6	167×57×130
0.4-8-3	0.4	8	158	11.5	167×57×130
0.4-10-3	0.4	10	198	14.4	167×57×180
0.4-12-3	0.4	12	238	17.3	167×57×180
0.4-14-3	0.4	14	278	20.2	167×57×210
0.4-15-3	0.4	15	298	21.7	167×57×210
0.4-16-3	0.4	16	318	23.0	167×57×210
0.4-18-3	0.4	18	359	26	167×57×240
0.4-20-3	0.4	20	398	28.9	167×57×240
0.4-25-3	0.4	25	498	36	167×85×210
0.4-30-3	0.4	30	597	43.3	167×85×250
0.4-40-3	0.4	40	796	57.6	167×85×300270×120×210
0.4-50-3	0.4	50	995	72	270×120×230
0.4-60-3	0.4	60	1194	86.4	300×120×280
0.4-80-3	0.4	80	1592	100.8	300×120×310
0.4-90-3	0.4	90	1790	129.6	300×120×310
0.4-100-3	0.4	100	1989	144	300×120×330

To Supply Polypropylene Film Capacitor