Ads by Google
Screw Terminal Type Aluminum Electrolytic Capacitor 5000 hour:
1.Capacitance has been increased by special etched foil techology and new structure of element.
2.High reliability series with the warranly of 5000 hours realized through improvement of the UWA type into a longer-life type.
| D | P | S | T | Cap material |
| 77 | 32.0 | M5×10 | 5.0 | Phenol |
| 90 | 32.0 | M5×10 | 5.0 | Phenol |
| 101 | 32.0 | M6×12 | 3.0 | PPS |
Unit:mm
| Terminal | Recommended torque(permissible level)[N·m] | Terminal permissible current[A] |
| M5 | 2.2(1.5~3.0) | 60 |
| M6 | 3.5(3.0~4.0) | 100 |
| M8 | 7.5(7.0~8.0) | 120 |
Ripple current correction coefficient:
| Temperature(°C) | 40 | 60 | 70 | 85 | |
| Correction coefficient | 1.0 | 0.75 | 0.62 | 0.37 | |
| Frequency (Hz) | 120 | 300 | 1K | ≥10K | |
| Correction coefficient | 1.0 | 1.1 | 1.3 | 1.4 | |
When using this capacitor at a frequency below 120Hz,contact us in advance.
Product Specifications:
| Items | Specifications |
| Temperature Range | -25°C~+85°C |
| Rated Voltage | 350V~450V.DC |
| Capacitance Tolerance | ±20%(20°C,120Hz) |
| Leakege Current | 0.01CV(uA) or 7mA,whiceever is smaller or less [C=nominal capacitance(uF),V=rated voltage(V)] |
| Dissipstion Factor | Less than the value specified in the standard products table(20°C,120Hz) |
| Permissible Ripple Current | As specified in the standard products table(40°C,120Hz) |
| High-Temperature Load | After the rated voltage with specified ripple current is applied at the 85°C for 5000 Hours: Capatance Tolerance : ±15% or less of the initial value Dissipstion Factor : 175% or less of specified initial value Leakege Current : Specified initial value or less |
| Other | JIS C 5101-4 |
Screw Terminal Type Aluminum Electrolytic Capacitor 5000 hour: