Ads by Google
Screw Terminal Type Aluminum Electrolytic Capacitor 5000 hour:
Smaller size,High ripple current.These features are accomplished by new heat radiation structure and low ESR material.
D | P | S | T | Cap material |
64 | 28.6 | M5×10 | 4.5 | PPS |
77 | 32.0 | M6×12 | 5.5 | PPS |
90 | 32.0 | M6×12 | 3.0 | PPS |
Unit:mm
Terminal | Recommended torque(permissible level)[N·m] | Terminal permissible current[A] |
M5 | 2.2(1.5~3.0) | 60 |
M6 | 3.5(3.0~4.0) | 100 |
M8 | 7.5(7.0~8.0) | 120 |
Ripple current correction coefficient:
Temperature(°C) | 40 | 60 | 85 | |||
Correction coefficient | 1.89 | 1.67 | 1.00 | |||
Frequency (Hz) | 50/60 | 120 | 300 | 1K | ≥10K | |
Correction coefficient | 0.7 | 1.0 | 1.1 | 1.3 | 1.4 |
Product Specifications:
Items | Specifications |
Temperature Range | -40°C~+85°C |
Rated Voltage | 400V~450V.DC |
Capacitance Tolerance | ±20%(20°C,120Hz) |
Leakege Current | 0.01CV(uA) or 7mA,whiceever is smaller or less [C=nominal capacitance(uF),V=rated voltage(V)] |
Dissipstion Factor | Less than the value specified in the standard products table(20°C,120Hz) |
Permissible Ripple Current | As specified in the standard products table(85°C,120Hz) |
High-Temperature Load | After the rated voltage with specified ripple current is applied at the 85°C for 5000 Hours: Capatance Tolerance : ±15% or less of the initial value Dissipstion Factor : 175% or less of specified initial value Leakege Current : Specified initial value or less |
Other | JIS C 5101-4 |
Screw Terminal Type Aluminum Electrolytic Capacitor 5000 hour