Ads by Google
1.Uniformity of Water Distribution2.Wide Operation Range3.Long Service Life
Product Features
The ABS material nozzle is used to spray the water into the filling in the proposed cooling tower. This kind of nozzle has good feature such as the uniformity of water distribution, difficult to be obstructed and wide range of water load etc. The nozzle ensures that it can prevent from separating from the piping so as to assure the distribution system keep safe running for a long period. The service life of nozzle is no less than 20 years at normal condition.The nozzle which is special designed for anti-falling is applied in this proposal, it can be connected with pipe firmly and won’t fall down during operation of the cooling tower as its special lock design.In the proposed cooling tower, nozzle is made of non-metal material, so the application of non-metal material greatly increase the anti-corrosion capacity and prolong the service life.Product Classification
1).Description: Anti-loose spray nozzle
Material: ABS
Forming process: Plastic injection
Working pressure: 0.8mH2O
Water distribution under pressure: 1#(Ø32):9.2m3/h ;2# (Ø25):5.6m3/h ;2#(Ø20):3.6m3/h ;3#(Ø16):23m3/h .
Flow coefficient: 0.8
2).Description: Turbo shell nozzle
Material: PP
Forming process: Plastic injection:
Working pressure: 2mH2O
Water distribution flowrate under working pressure: Ø44: 11m3/h.
Flow coefficient: 0.32
3).Description: Twin-spraying nozzle
Model : QP-12~32
Material: A.B.S(or cast iron, anti-friction cast iron, cast aluminum)
Arrangement: Twin tangent water inlet arrangement
Working pressure: Above 5mH2O
4).Description: Upward spray nozzle
Material: A.B.S
Forming process: Plastic injection
5).Description: Anti-block nozzle
Model: NS-4
Material: ABS
Forming process: Plastic injection:
Arrangement: Basin water distribution
6).Description: Reflection nozzle
Model: RFⅠ,Ⅱ,Ⅲ
Material: ABS
Forming process: Plastic injection
Arrangement: Tank or piping
Flow coefficient: 0.92
Aperture size: Ø20-46
Cooling Tower Nozzle